Air Monitor Corporation VOLU-flo / OAM Installation Procedure

INSPECTION & HANDLING.
VOLU-flo/OAM stations should be carefully inspected for damage prior to installation. Report damage to your Freight
Department, or contact the delivery carrier.
Almost any means of handling can be utilized depending on the length and weight of the station. Stations may
be handled while in any position. However, it is important not to drop or mishandle a station such that damage is
done to the expanded metal screen, sensors, signal connection fittings, or flanges.
Air Monitor Corporation (hereinafter referred to as "Seller") warrants that at the time of shipment, products sold
pursuant to this contract will be free from defects in materials and workmanship, and will conform to the
specifications furnished or approved in writing by Seller. No warranty is given that delivered products will conform
to catalog sheets, data sheets, and the like, which are subject to change without notice.
Seller will repair or replace, at its option, any products listed under this warranty which is returned freight pre-
paid to Seller and within the earlier of one (1) year after start-up or fifteen (15) months after shipment, prove upon
test and examination by Seller to be defective within the terms of this warranty. The warranty period for any item
repaired or replaced shall be for the time remaining on the warranty period for the original components. Purchaser
shall notify Seller in writing of such defect within sixty (60) days of discovery of the defect.
This warranty does not extend to any product sold by Seller which has been the subject of misuse, neglect,
accident, damage or malfunction caused by interconnection with equipment manufactured by others, improper
installation or storage, or used in violation of instructions furnished by Seller, nor does it extend to any product
which has been repaired or altered by persons not expressly approved by Seller. Nor does Seller warrant
equipment against normal deterioration due to environment; nor items such as thermocouples, electrodes, and
similar items subject to wear or burnout through usage. Adjustments for items or equipment not manufactured
by Seller shall be made to the extent of any warranty of the manufacturer or supplier thereof. Seller shall not be
liable for any special or consequential damages or for loss of damage directly or indirectly arising from the use
of the products. Seller's warranty shall be limited to replacement of defective equipment and shall not include
field removal and installation expenses.
The warranty set forth above is in lieu of all other warranties either express or implied and constitutes the full extent
of Air Monitor Corporation's liability to the customer, or any other party for breach of warranty. THERE ARE NO
EXPRESS WARRANTIES EXCEPT AS SET FORTH HEREIN. THERE ARE NO IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE, WHICH ARE PARTICULARLY
DISCLAIMED.
VOLU-flo / OAM Station
WARRANTY
INSTALLATION PROCEDURE