Table of Contents
Advertisement
5.3. LCD Display
1
2
3
ID
Item
1
INPUT Charging
2
DC Charging status
3
Battery Power Levels
4
OUTPUT DC
5
OUTPUT AC
6
Power loading Status
ID
Item
7
Error Status
7.1 Over Load
7.2 Over Heat
7.3 Battery Low
The "Charging" displaying when charging input
Displaying total charging power (WHr) and charging time (Hr)
Battery capacity level, 10 levels indicate 0%-100% power levels
DC output ports status: Type-C, USB, Car Charging (DC)
ON: available; Flashing: Over Load
AC output ports status
ON: available; Flashing: Over Load
Displaying total remaining capacity (WHr) and remaining run
time (Hr), accordingly current total loading (including DC and AC
loading).
SYSTEM RESET MIGHT REQUIRED
Total output power loading is too high, or a short circuit device
is inserted. Remove ALL inserted devices from output sockets
and reset the main Power switch at the back of the unit.
The inside box temperature too high, we should be stop
loading or charging and wait for the unit cooling down.
The battery is less than 10%, buzzle will alarm. Recommended
to stop operation and charge PES immediately.
- 10 -
Function
7
Function
4
5
6
Advertisement
Table of Contents
