Table of Contents
Advertisement
Quick Links
RTS 3P1 DE LUXE PIT BUILDING GARAGE WITH OWNERS BOX
CONGRATULATIONS
Congratulations in choosing a unique product to enhance your slot car track
diorama. This can truly be described as a product born from a love for slot cars.
Buying this product have made you a member of a very special family, yes you are
not dealing with a faceless business, but rather a family of slot car fanatics.
We have put hours of skill and more importantly love into this product and it is
wonderful to share our love for slot cars with you. May you enjoy the build and have
years of joy having it as part of your trackside diorama.
WARRANTY
This product is covered by a comprehensive money-back warranty to ensure your
absolute satisfaction with your purchase.
WHO ARE WE?
This product is brought to you by racetrackscenics.com. If you have not done so
already, please visit our website today. You are also most welcome to visit the
Facebook pages
"Race Track Scenics Slot Car Scenery" and "Johan Malan" to keep
up to date with the latest developments and the launching of exciting new products
that may be in the pipeline.
You can contact Kevin Sharpe on
Email: racetrackscenics@gmail.com
Text in the USA 586 549 2879
WhatsApp 1-586-549-2879
for any assistance that you might require. Your feedback and a photo or two of your
trackside addition will really be appreciated. We love to share in your joy!
WHAT IS IN THE KIT?
In this kit you will find all the laser cut pieced needed to assemble this product. The
pieces are still intact in the sheets as they were cut to ensure that all the parts are
there. Some of the loose bits inside pieces may have been removed, but they are not
part of the finished product. In the section "FAMILIARIZE YOURSELF" below, you
will find diagram(s) that identify and explain each piece (component) that you are
about to assemble. In the section "PREPARING THE CUT PIECES" below, you will
learn how to proceed to prepare the pieces for assembly.
ASSEMBLY INSTRUCTIONS
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for RTS 3P1
- Page 1 ASSEMBLY INSTRUCTIONS RTS 3P1 DE LUXE PIT BUILDING GARAGE WITH OWNERS BOX CONGRATULATIONS Congratulations in choosing a unique product to enhance your slot car track diorama. This can truly be described as a product born from a love for slot cars.
- Page 2 WHAT YOU WILL NEED We have specifically designed this product so that it is easy to assemble with only a few basic tools. You will need the following: a screwdriver a sharp hobby knife some glue a few toothpicks a few earbuds can be handy a paintbrush and paint or a rattle can or two with spray paint.
- Page 3 FAMILIARIZE YOURSELF Have a look at the photo of the finished product. Now have a look at this diagram where all the laser cut parts are showed and numbered from A to J and try to identify which is which and where they fit in. You will notice that the two side walls are double skinned to give a brick finish on both sides.
- Page 4 PREPARING THE CUT PIECES Firstly, remove all the laser cut parts from the sheets. The sheets can be discarded. Clean the edges of the parts if there are any tiny bits where the parts were fixed to the sheets. This can be done with your knife or even your thumb nail. We recommend that you start by sanding your finished product with a very light sandpaper to ensure a smooth finish for the end product.
- Page 5 must not be painted or sprayed with the same colour can be a tedious process. Pre- painting will avoid this process. Please ensure that no paint clog a sleeve where a lug must fit in later. The tolerances are often so tight that too thick a layer of paint may cause problems. It is our experiences that a small foam roller instead of a brush, will produce a better finish and far less clogging of sleeves.
- Page 6 CONCLUSION We sincerely hoped you have enjoyed this assembly and finishing. Please remember to give us some feedback and either send or post some pictures of this product on your track.
Need help?
Do you have a question about the 3P1 and is the answer not in the manual?
Questions and answers