Table of Contents
Advertisement
Quick Links
CONGRATULATIONS
Congratulations in choosing a unique product to enhance your slot car track
diorama. This can truly be described as a product born from a love for slot cars.
Buying this product have made you a member of a very special family, yes you are
not dealing with a faceless business, but rather a family of slot car fanatics.
We have put hours of skill and more importantly love into this product and it is
wonderful to share our love for slot cars with you. May you enjoy the build and have
years of joy having it as part of your trackside diorama.
WARRANTY
This product is covered by a comprehensive money-back warranty to ensure your
absolute satisfaction with your purchase.
WHO ARE WE?
This product is brought to you by racetrackscenics.com. If you have not done so
already, please visit our website today. You are also most welcome to visit the
Facebook pages
"Race Track Scenics Slot Car Scenery" and "Johan Malan" to keep
up to date with the latest developments and the launching of exciting new products
that may be in the pipeline.
You can contact Kevin Sharpe on
Email: racetrackscenics@gmail.com
Text in the USA 586 549 2879
WhatsApp 1-586-549-2879
for any assistance that you might require. Your feedback and a photo or two of your
trackside addition will really be appreciated. We love to share in your joy!
WHAT IS IN THE KIT?
In this kit you will find all the laser cut pieced needed to assemble this product. The
pieces are still intact in the sheets as they were cut to ensure that all the parts are
there. Some of the loose bits inside pieces may have been removed, but they are not
part of the finished product. In the section "FAMILIARIZE YOURSELF" below, you
will find diagram(s) that identify and explain each piece (component) that you are
about to assemble. In the section "PREPARING THE CUT PIECES" below, you will
learn how to proceed to prepare the pieces for assembly.
ASSEMBLY INSTRUCTIONS
RTS 3PS ELEVATED CAR STAND
1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for RTS 3PS
- Page 1 ASSEMBLY INSTRUCTIONS RTS 3PS ELEVATED CAR STAND CONGRATULATIONS Congratulations in choosing a unique product to enhance your slot car track diorama. This can truly be described as a product born from a love for slot cars. Buying this product have made you a member of a very special family, yes you are not dealing with a faceless business, but rather a family of slot car fanatics.
- Page 2 Our laser cut parts are specifically cut to very fine tolerances to ensure a snug fit and therefore it is wise to check all fits before gluing parts together. You may need to trim a lug here and there to make assembly easier. WHAT YOU WILL NEED We have specifically designed this product so that it is easy to assemble with only a few basic tools.
- Page 3 FAMILIARIZE YOURSELF Have a look at the photo of the finished product. Now have a look at the diagram where all the laser cut parts are showed and numbered from A to C and try to identify which is which and where they fit in.
- Page 4 You will notice that there are two long sides (B 1-2) and two short sides (C 1-2) that will fit into the base plate (A). PREPARING THE CUT PIECES Firstly, remove all the laser cut parts from the sheets. The sheets can be discarded. Clean the edges of the parts if there are any tiny bits where the parts were fixed to the sheets.
- Page 5 LET’S GET STARTED WITH THE ASSEMBLY Start by placing the base plate (A) on your work space. Now you can glue the nubs of the four side walls (B 1-2) and (C 1-2) into the slots of the base plate. Remember to also apply some glue where the walls touch each other.
Need help?
Do you have a question about the 3PS and is the answer not in the manual?
Questions and answers