CLB W1600 Manual

W1600 wireless acoustic monitoring module

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

W1600 Wireless Acoustic Monitoring Module

Document reference:

Document version:

Approval date:

I-FORM

U1283_RQ_2210

xxxx-xx-xx

Status:

Pending

Approver:

Table of Contents

Need help?

Do you have a question about the W1600 and is the answer not in the manual?

Questions and answers

Summary of Contents for CLB W1600

Page 1 I-FORM W1600 Wireless Acoustic Monitoring Module Document reference: U1283_RQ_2210 Document version: Status: Pending Approval date: xxxx-xx-xx Approver:...
Page 2 I-FORM Subject: W1600 WAMM Reference: U1283_RQ_2210 Status: Pending Version: Approver: Change Log: Version Date Author Description 2019-09-18 Yorick Groot Initial version Removed irrelevant parts. 2019-12-22 Updated texts. Updated images/descriptions 2019-12-23 Updated text 2019-12-30 Updated images 2020-05-07 Updated I/O text 2020-06-08...
Page 3: Table Of Contents
I-FORM Subject: W1600 WAMM Reference: U1283_RQ_2210 Status: Pending Version: Approver: Table of Contents ___________________________________________________________________ 5 RODUCT NAME ___________________________________________________________________ 5 RODUCT IMAGE ________________________________________________________________ 5 RODUCT SUMMARY __________________________________________________________ 7 ECHNICAL PECIFICATIONS 1.4.1 Mechanical Specifications ____________________________________________________ 7 1.4.2 Electrical Specifications _____________________________________________________ 7 1.4.3 Connection Specifications____________________________________________________ 8 1.4.3.1...
Page 4 I-FORM Subject: W1600 WAMM Reference: U1283_RQ_2210 Status: Pending Version: Approver: 2.10.1 Module identification ______________________________________________________ 27 2.10.2 Lost communication _______________________________________________________ 27 2.10.3 Error reporting ___________________________________________________________ 28 MANUFACTURER CONTACT INFORMATION _____________________________________ 29 Filename: U1283_RQ_2210_IFORM_W1600.doc page 4 of 29...
Page 5: Product Name
The W1600 contains audio functionalities (e.g. Acoustic Monitoring). The microphone sensitivity and volume of the speaker can be adjusted according to the CLB standards. The W1600 also contains a blue led which can be activated when a speech connection is established. This functionality can be switched off.
Page 6 Various button configurations are available, as indicated in Image 2 below. The configuration is indicated by a product number extension: <front panel> <left buttons> <right buttons>, i.e. W1600-PAE (Image 1). [Z]ero (blanco) [Z]ero (blanco) [Z]ero (blanco) [U]niversal [U]niversal [P]atient nursecall [A]ssistance [E]mergency Image 2: W1600 buttons Filename: U1283_RQ_2210_IFORM_W1600.doc page 6 of 29...
Page 7: Technical Specifications
I-FORM Subject: W1600 WAMM Reference: U1283_RQ_2210 Status: Pending Version: Approver: 1.4 Technical Specifications 1.4.1 Mechanical Specifications Dimensions PCB assembly 125 x 70,25 mm Dimensions housing surface 169 mm x 92,1 mm x 29,5 mm mount Material Colour Grey, white Weight ~ 190 g incl.
Page 8: Connection Specifications
50 mA 1.4.3 Connection Specifications 1.4.3.1 Front connections 5Vdc Input Output Pear push Image 3: W1600 front connection Front connections 3.5mm 4p. mini jack Pear Push port (Analogue) Output (Open Collector) Input (A/D) 5Vdc/50mA J5 counterparts 3.5mm 4p mini-jack-plug Wiring J5...
Page 9: Rear Connections
Status: Pending Version: Approver: 1.4.3.2 Rear connections Image 4: W1600 rear connections Rear connections USB-C Power Connector. It is strongly advised to use the official Raspberry Pi AC Adaptor Model: KSA-15E-051300HE(-WH) 3p pin header (I/O port) (Only for powering P2501 Pullcord = 50 mA @ 5.0 V...
Page 10 I-FORM Subject: W1600 WAMM Reference: U1283_RQ_2210 Status: Pending Version: Approver: Rear connections 2p plug connector push-in connector Manufacturer: Phoenix Contact Type no. FK-MPT 0,5/ 2-ST-3,5 Part no. 1913921 Option 2 2p plug connector screw connection Manufacturer: Phoenix Contact Type No. PT 1,5/2-PVH-3,5 Part no.
Page 11: Indicator Specifications
U1283_RQ_2210 Status: Pending Version: Approver: 1.4.4 Indicator Specifications 1.4.4.1 Front indicators Image 5: W1600 indicators Index Default colour Remark RED (RGB) Button 1 indicator (default: Nurse call) GREEN (RGB) Button 2 indicator (default: Presence) RED (RGB) Button 3 indicator (default: Assistance)
Page 12: Actuator Specifications
Ambient light measurement for brightness adjustment Microphone Microphone for speech or AM2 Activated by holding a magnet at position ≤2 seconds: Network presence (Identify) notification of W1600 to the system. 1 beep can be heard when magnet is positioned correctly. ≥5 seconds: Safe shutdown (manual):...
Page 13: Rear Actuators
Declaration of Conformity (DoC) Directive 2014/53/EU of 16 April 2014 concerning radio equipment. Hereby, CLB bv declares that this wireless device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU Note: Observe national and local regulations where the device is used. This device may be restricted for use, depending on the local network.
Page 14: Product Standards
I-FORM Subject: W1600 WAMM Reference: U1283_RQ_2210 Status: Pending Version: Approver: 1.4.8 Product Standards Audio/video, information and communication IEC 62368-1:2014 technology equipment Part 1: Safety requirements 1.4.9 Radio Specifications EIRP average (equivalent isotropically radiated power) Output Type Frequency range power Bluetooth LE 2402-2480 MHz (40 channels) 2.7 dBm...
Page 15: Hardware Overview
I-FORM Subject: W1600 WAMM Reference: U1283_RQ_2210 Status: Pending Version: Approver: 1.7 Hardware overview Image 7: W1600 surface mount assembled unit - Dimensions: mm Image 8: W1600 surface mount exploded view Filename: U1283_RQ_2210_IFORM_W1600.doc page 15 of 29...
Page 16 I-FORM Subject: W1600 WAMM Reference: U1283_RQ_2210 Status: Pending Version: Approver: 1. Cut parts 2. Break out parts 3. Place conduit reducer K25-NL (25 x 13 mm) K25-UK (25 x 16 mm) K10-UK (16 x 10 mm) Image 9: Connecting conduit reducers Filename: U1283_RQ_2210_IFORM_W1600.doc...
Page 17: Installation
CLB Handset 5 buttons for Cx60x 3,5mm 4 pin mini jack connector P2680-7b CLB Handset 7 buttons for Cx60x 3,5mm 4 pin mini jack connector NOTE: The P2100 (RJ45 connector) is NOT compatible with the W1600. Filename: U1283_RQ_2210_IFORM_W1600.doc page 17 of 29...
Page 18: Network Requirements
I-FORM Subject: W1600 WAMM Reference: U1283_RQ_2210 Status: Pending Version: Approver: 2.2.3 Network requirements The following network requirements should be met in order to ensure proper functioning of the system. 1. Availability of a DHCP server is required o The DHCP scope shall have sufficient IP addresses available o The DHCP lease time shall be set at 24 hours at least.
Page 19 I-FORM Subject: W1600 WAMM Reference: U1283_RQ_2210 Status: Pending Version: Approver: Typical Input, Potential-free Contact Port must be configured as input. PORT 1-2 PORT W16000 Image 10: Typical Input, Potential-free contact Typical Input, Contact Potential Port must be configured as input, for external controlling of internal logic ports.
Page 20 I-FORM Subject: W1600 WAMM Reference: U1283_RQ_2210 Status: Pending Version: Approver: Typical Output, Sink Port must be configured as output. PORT 1-2 PORT W16000 Image 12: Typical output, sink External device can have an output voltage up to 24Vdc. Typical Output, Source Port must be configured as output, for controlling external logic ports.
Page 21: Maintenance Instructions
I-FORM Subject: W1600 WAMM Reference: U1283_RQ_2210 Status: Pending Version: Approver: Typical Combined Input/Output (5V power supply only for powering P2501 Pullcord) Port must be configured as combined Input & Output. PORT 1 P2501 Pullcord only W16000 Image 14: Typical combined input/output, (internal power supply) 2.3.3...
Page 22: Unit Connectors
I-FORM Subject: W1600 WAMM Reference: U1283_RQ_2210 Status: Pending Version: Approver: 2.4 Unit connectors 2.4.1 Included connectors 2.4.2 Not included connectors Only prescribed Phoenix parts are allowed! Product Option 1 Description: 2p plug with push-in spring connection Manufacturer: Phoenix Contact Type no. FK-MPT 0,5/ 3-ST-3,5 3p connector (J2) Part no.
Page 23: Software
Software 2.5.2.1 Network settings The network settings of the W1600 needs to be configured in order to connect to the required WiFi network. These settings can be configured via the CLB DDC, of CLB Configurator. To access the W1600, it is preconfigured to connect to the wireless network with SSID ‘CLB-Config’. Once the network settings have been changed, the W1600 will always try to connect to the configured network first on startup.
Page 24 CLB Server WiFi configure the applicable applicable Finalise W1600 configuration Server WiFi network and network and Device Manager. in Configurator Device Manager. (W1600 will (W1600 will reboot after reboot after writing settings) writing settings) Reboot needed after configuration? W1600 W1600...
Page 25: Default Settings
** LED brightness is adjusted between the configured min. and max. values by the module’s light sensor. 2.5.2.3 Required software applications • The W1600 is fully supported from suite v.3.9 or higher. Please refer to the Configurator manual for instructions on how to update this module’s • firmware and change the settings described above.
Page 26: Focus Points
Take all necessary precautions to safely install the hardware. 2.7.3.1 Connecting peripherals on mini jack connector via safe release cables The W1600 is able to detect mini jack connectors in order to prevent a possible short circuit or unintended message when connecting or disconnecting peripherals. However, this detection mechanism does not work when connecting the mini jack at a safe release cable.
Page 27: Known Issues And Experience
Does the W1600 have I/O functionality on a jack port like the C1600 module? Answer 1 No, for the W1600 this is where the microphone is located. As mentioned in this I-Form the W1600 module has only 2 I/O ports on the rear of the module.
Page 28 I-FORM Subject: W1600 WAMM Reference: U1283_RQ_2210 Status: Pending Version: Approver: 2.10.3 Error reporting The module is able to report several errors to the system. Consult the configurator manual for instructions on how to view logs of module errors. Error message to...
Page 29 I-FORM Subject: W1600 WAMM Reference: U1283_RQ_2210 Status: Pending Version: Approver: Manufacturer Contact Information CLB bv G.G. Schipperstraat 24 1483 GE De Rijp The Netherlands Filename: U1283_RQ_2210_IFORM_W1600.doc page 29 of 29...