R&B Wire Products RB51PL Assembly Instructions

R
· Never allow anybody to ride in or on cart.
· Always proceed slowly.
· Be sure wheels roll free and turn easily.
!
· Place all loads in center of basket for balance.
· Maximum capacity per basket: 100 pounds.
@
SALES RBWIRE.COM
STEP
Set base upside down and insert caster stem into base leg.
Insert full-thread hex bolt into each leg hole, and secure
with nylon locking nuts facing toward inside of unit. Repeat
for remaining casters.
STEP
Turn base over so wheels are down. Attach handle bar
to base by removing pre-installed upper base bolt,
threading it through handle bar and re-inserting into
original hole in base. Do not completely tighten until
bottom bolt has been inserted.
STEP
Insert partial-thread hex bolt through bottom hole of
handle bar and through base. Secure with nylon lock
nut. Tighten all bolts and nuts on handle bar.
(800) 634-0555
ASSEMBLY INSTRUCTIONS
Mobile Laundry Scale
TOOLS REQUIRED:
(2) 7/16 wrenches or sockets
(1) 1/2 wrench or socket
1 person assembly
1
2
3
HARDWARE INCLUDED
(Not to scale)
x2 Partial-thread bolts
x14 Nuts
RBWIRE.COM
MODEL RB51PL
x8 Full-thread bolts
x4 Flat washers