Epson OT-WL05 Technical Reference Manual page 17

Setting up from a Windows Computer
Necessary Items
Prepare the following items.
 TM printer fitted with this product
 Computer for setting: Computer equipped with Windows 10/8/7/Vista, and a wireless LAN
 Utility for setting:
The setup procedure using EpsonNet Config is explained here.
1
Turn on the computer.
2
Activate Windows Wireless Network Connection and select [EPSON_Printer] as the
connection device on the screen that appears.
If the window to enter a pass phrase appears, enter "12345678".
Default settings on printer are the following values.
Network mode
SSID
Pass phrase
IP Address
An example of Connection Screen
 For the setting method for the computer for setting, see the manual for your
computer.
 If you are setting multiple TM printers, only turn on the power for the printer you are
setting. You cannot set multiple printers at the same time.
When connecting to the printer is complete, setup the Wireless LAN by using the EpsonNet Config or
EpsonNet Config (Web version).
For downloading and installation of the EpsonNet Config, see
EpsonNet Config (Web version) is a utility to configure the network and other settings on a web
browser . For details, refer to the Technical Reference Guide of the printer or the interface board to
which this product is fitted.
function
EpsonNet Config or EpsonNet Config (Web version)
SimpleAP mode
EPSON_Printer
12345678
192.168.192.168
Chapter 2 Installation
"Software" on page 19
2
17