Download Print this page

4M PAINT YOUR OWN LANTERN Quick Start Manual

Advertisement

Quick Links

Let your imagination fly. Turn 2 plain paper lanterns into master-
pieces. They make cool room décor and ideal presents to give and
receive.
A. SAFETY MESSAGES
C.3
1. Please read through these instructions before you start.
2. Adult assistance and supervision is recommended.
3. Intended for children of age over 8.
4. This kit and its finished product contain small parts which may cause choking if
misused. Keep away from children under 3 years old.
5. The painted lanterns are intended for decorative purposes only. It is not recommended
for illumination. Do not install any light source into it.
B. OTHER REMARKS
1. Always work on a solid, level working surface and try to keep the area neat and clean.
2. If clothes are stained by paint then wash them immediately. Dried paint may leave mild
C.5
stains on clothing even when they are washed. Put on an apron or wear old working
clothes as necessary.
C. CONTENTS
2 x lanterns of 15cm diameter, 2 x lantern expanders, 1 x paint strip, 2 x paint brushes and
1 x detailed instructions.
QUESTIONS & COMMENTS
We treasure you as a customer and your satisfaction with this product is important to us. In case you
have any comments or questions, or you find any parts of this kit missing or defective, please do not
hesitate to contact our distributor in your country, whose address is printed on the package. You are
also welcome to contact our marketing support team at Email: infodesk@4M-IND.com, Fax (852)
25911566, Tel (852) 28936241, Web site: WWW.4M-IND.COM
Small parts.
Not for Children under 3 years.
© 2006 4M INDUSTRIAL DEVELOPMENT LIMITED.

Advertisement

loading

Summary of Contents for 4M PAINT YOUR OWN LANTERN

  • Page 1 You are also welcome to contact our marketing support team at Email: infodesk@4M-IND.com, Fax (852) 25911566, Tel (852) 28936241, Web site: WWW.4M-IND.COM...
  • Page 2 D. ASSEMBLY 1. Expand the paper lantern gently as in the diagram. 2. Carefully insert the expander through the big hole with 2 eyelets. 3. Carefully insert the expander slots (convex points) in the eyelets. You may gently bend the expander so that it can fit into the slot.