Page 1
NX-S/O 2/4/8 Analog Gateway Quick User Guide INDEX OVERVIEW NX-S/O 2/4/8 PORTS CONNECTING THE IAG800 V2 CONFIGURING THE NX-S/O 2/4/8 Obtaining the IP address Configure by Web GUI Via LAN1 Port Via LAN2 Port Configure by the IVR...
Page 2
OVERVIEW NX-S/O 2/4/8 Series Analog Gateway, is an open-source Asterisk-based Analog VoIP Gateway solution for SMBs and SOHOs. With a friendly GUI and unique modular design, users can easily set up their customized Gateway. Also, secondary development can be completed through AMI (Asterisk Management Interface). PACKAGE CONTENTS 1 X DEVICE 1 X FOOT PAD...
Page 3
NX-S/O 2/4/8 PORTS 1: Power Indicator 2: System LED 3: Analog Telephone Interfaces and corresponding Channels State Indicators 1: Power interface 2: Reset button 3: Ethernet ports and indicators...
Page 4
CONNECTING THE IAG800 V2 The NX-S/O 2/4/8 is designed for easy configuration and easy installation. To connect the NX-S/O 2/4/8, please follow the steps above: 1. Plug a standard RJ11 telephone cable into the phone port and connect the other end of the telephone cable to a standard touch-tone analog telephone.
Page 5
Note: The computer must be connected to the same subnet as the NX-S/O 2/4/8. This can easily be done by connecting the computer to the same hub or switch as the NX-S/O 2/4/8. Via LAN2 Port If your NX-S/O 2/4/8 is connected via the LAN2 port, please refer to the following steps. 1.