Page 2
You need Hardware List 1 person is needed Take 20 minutes 20mins M8*65mm 13PCS 13PCS 13PCS...
Page 3
PRODUCT ASSEMBLY PRODUCT ASSEMBLY STEP 2 Check the package contents before getting started ! STEP 1 M8*65mm M8*65mm 5PCS 5PCS 8PCS 8PCS 8PCS 5PCS Put the screws in the holes, tighten the screws, but not too tight, 90% is ok. Put the screws in the holes, tighten every screw, not too tight, 50% is OK, make sure every screw...
Page 4
PRODUCT ASSEMBLY PRODUCT ASSEMBLY STEP 4 STEP 3 Please put the chair on a flat surface. Please adjust the parts connecting the seat and the back to make sure four legs are on same level. Tighten the bolts. Tip: It would be easy to adjust the legs by sitting on the chair and do that with the help of your own weight.