PET M6-02 Instruction Manual

Cleaning precautions
-For the first time, clean the water tank and accessoriesIt is normal that the filter element may have some
powder. Soak it for 10minutes and rinse it before first use. It is recommended to replace it every4 weeks.
-When the pet water dispenser is used for many pets, thefrequency of the filter element replacement should
be higherPlease clean the water tank, filterelement and water pump regularly according to the water quality
and petdrinking habits. Once a week is recommandedPlease clean the elbow with the cleaning brush come
along, the water tanand other accessories could be cleaned with any cloth.
-Be sure to do cleannig after disconnecting the power supply.
Not suitable for outdoor use
Submersible pump cleaning method
Use your nails to enter the waterpanel and pull it out
Dismantle and clean each component weekly as
shown above
Regulating water flow
+ Maximum, - Minimum
-
+
Intelligent module
This module is configurated in smart version only.Standard Edition does not have this configuration
When the moving object is close to the sensor, it runs automatically, and the delay closes automatically.
Connect to water dispenser
Power input
DC5V
Medium recommended
5
Time adjustment
10 seconds - 5 minutes
General do not tune
·Avoid direct sunlight
·Avoid water intake
·Avoid wind blowing
People
or
pets
installation diagram
6
Instruction Manual
M6-02
1