Advertisement
Available languages
Available languages
Instructions for use
GB
1. Insert the main holder (14) into the main body (16), and tight up by the holder fixed screw (15).
2. Insert the 5pcs wheels (21) into the base (19) , and tighten up by the base lock nut (20).
3. Put the back grill (7) on the motor shaft (8), and tighten up by the grill lock nut (6) to the motor
cover (9) Insert the blades(5) on the motor shaft (8), and tighten up by the blade lock nut (4).
4. Fixed the misting board (1) on the front grill (2), and tight up by misting board lock screws.
5. Connection the front grill (2) and back grill (7) by grill ring (10), and tighten up by grill lock nut
(11).
6. Insert the misting tube (22), connection to the misting board (1)
Fill the water tank:
Unscrew the valve cover to open the tank turning it anticlockwise, fill the tank with cold and
clean water making sure not to overfill it. To close the tank, screw the valve cover back on
securely turning it clockwise. Turn the tank over and place it back into its designated space at
the back of the fan main body.
Loosen
Tighten
ATTENTION!
• Make sure the product is unplugged from the mains before filling or refelling the water tank.
• Only use water in the water tank. Do not add any chemicals, oils or other additives.
• Only use cold or lukewarm water in the water tank. The water must not be warmer than 40°C.
Place the fan on a dry and stable surface and insert the plug on the socket; the unit will emit a
short "BIP" sound indicating that power is supplied. For your convenience the unit can be
operated by using control panel in the main body or by using remote control included.
7
Control panel
Remote Control
Advertisement
