Do you have a question about the BANG spot and is the answer not in the manual?
Questions and answers
Summary of Contents for FINNSUB BANG spot
Page 1
//////////////////////////////////////////////////////////////////////////////////////////// Warranty certificate and instructions for use of the light FINNSUB BANG spot / FINNSUB BANG wide...
Page 2
Your purchased model is marked on the packaging. BANG Spot is designed for more advanced divers who dive in muddy waters where there is a need to glimpse the sediment and at the same time emphasize signaling that is more readable when done with a narrow light beam.
Page 3
contamination, service or replacement is necessary - therefore, avoid salt water penetration into the charging adapter! Charging procedure : 1. Make sure that the charging contacts of the dive light are completely dry and free from any salt residues and other debris.
Page 4
If the user taps out of set time intervals (does not observe "rhythm" or intensity), there is a time delay of 0.8 seconds, when the dive light ignores another tap and any further tap in this delay prolongs the delay for another 0.8 sec until the light is at 0.8 sec at rest.
Page 5
Do not store the dive light in a location where it could be shaken, which could cause the lamp to turn on accidentally and discharge the battery. 7. TECHNICAL SPECIFICATION Light flux: 1100 Lumen Light temperature: 7000 K (cold white light) Light intensity: BANG spot: 14000 lux/1m BANG Wide: 7000 lux/1m Light beam angle: BANG spot: 5° ...
Page 6
Li-Ion batteries. Do not dispose of the lamp in communal or mixed waste, but dispose of it free of charge at designated collection points. If you wish you may return it to your nearest FINNSUB dealer. Proper disposal of this product will help to conserve natural resources and to prevent potential negative impacts on the environment and human health.
Page 7
2 The product for which a warranty claim is required in accordance with this Warranty Certificate will be handed over to your authorized FINNSUB dealer, complete with the warranty certificate duly completed or send it with a fault description and your contact details at: FINN SUB s.r.o., Rakovecká...
Page 8
//////////////////////////////////////////////////////////////////////////////////////////// FINN SUB s.r.o. Rakovecká 35, 635 00 Brno GSM: +420 606 603 999 www.finnsub.com ////////////////////////////////////////////////////////////////////////////////////////////...
Need help?
Do you have a question about the BANG spot and is the answer not in the manual?
Questions and answers