USA Lab MM-3TC Manual

3” tri-clamp mixing motor

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

3" Tri-Clamp Mixing Motor Manual

Model:

MM-3TC

Table of Contents

Summary of Contents for USA Lab MM-3TC

Page 1 3” Tri-Clamp Mixing Motor Manual Model: MM-3TC...
Page 2 Safety Precautions and Explanations At USA Lab, safety is our number one priority. The following information provides guidelines for safety when using USA Lab equipment. Any piece of machinery can become dangerous to personnel when improperly operated or poorly maintained.
Page 3 Ensure that all power sources are turned off when the machine is not in use. This encompasses electrical and pneumatic power. • Read the manual for any special operational instructions for each piece of equipment. All USA Lab authored manuals are typically included with each device as well as posted online. •...
Page 4: Symbols And Warnings
Symbols and Warnings Below are examples of commonly used symbols and what they mean. Understand them and their potential consequences.
Page 5: Operating Principals
Operating Principals The USA Lab 3” Tri-Clamp mixer is intended to provide a quick and simple way of mixing fluids in a pressureized vessel (positive or negative pressure). Using high quality seals the ¼ HP motor churns through most moderate to low vicosity fluids.
Page 6 Index Safety Precautions and Explanations 1. Important Information 1.1 Safety Notices 1.2 Technical Parameters 2. Diagrams 3. Control Panel Operation 3.1 Control Panel Operation 4. Installation 4.1 Included Items 4.2 Electrical Connection 4.3 Operating Area and Warnings 4.4 Initial Assembly and Connection 4.5 Operating Instructions and Notes 5.
Page 7: Section 1 | Important Information
Caution: Never use extension cords, power strips, or plug adapters other than what is supplied. • If the mains supply cord is damaged, it must be replaced by the manufacturer, USA Lab, or a similarly qualified and skilled persons to avoid hazard or injury.
Page 8: Section 2 | Diagrams
Section 2 | Diagrams Shaft and seal assembly: Motor to shaft coupler bolts:...
Page 9: Section 3 | Control Panel Operation
Circle Button: Rotation ON or OFF | Silver Knob: [SP – N/A] [SU – Set Speed] [ST – Set Timer] Section 4 | Installation 4.1 Included Items PACKING LIST Model Quantity MM-3TC Mixing Motor w/ Shaft and 4” Propeller 3” Tri-Clamp Gasket 3” Standard Pressure Clamp Manual...
Page 10 4.2 Electrical Connection Ensure that the outlet is well grounded and installed by a licensed electrician. Receptacle: NEMA 5-15R Plug: NEMA 5-15P Voltage: 110-120VAC Frequency: 50/60Hz Maximum Nominal Amperage: 15A 4.3 Operating Area and Warnings • The power supply cord exits the product at the top left-hand side (as viewed from the front). For ease of access, the cord should be retrieved prior to positioning the product in its final location.
Page 11: Section 5 | Maintenance
Do not use abrasive cleaning agents or tools to clean the delicate coating of your unit. Always wipe dry after cleaning. USA Lab or a qualified technician must carry out any repair if required. 5.2 Long Term Storage Inspect the unit for damages or concerns.
Page 12: Section 6 | Troubleshooting Table
Section 6 | Troubleshooting Table Problem Cause Solution A. Plug the unit in A. The unit is not plugged in B. Repair the damaged plug B. Plug is damaged The unit is not powering ON C. Verify power at C. Power supply receptacle D.
Page 13: Section 7 | Warranty Information And Coverages
Within this warranty period USA Lab will replace or repair components that fail during normal daily use. Such repairs or parts will be covered in full by USA Lab and the customer will be responsible for shipping, labor, and custom duties.
Page 14 30 days. exceptions. You will be responsible for the return shipment unless deemed defective by USA Lab. In that case, we will pay for return shipment and replacement shipment costs. • The item(s) must be returned in original packaging and in undamaged condition.
Page 15 This manual and its contents are subject to change without notice. USA Lab reserves the right of ultimate interpretation of the instruction manual. Additionally, USA Lab is not responsible for damages or injuries caused by improper use; knowingly or unknowingly.