Pfaff Industrial Seam Instruction Manual

Test station

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

Seam test station

INSTRUCTION MANUAL

296-12-19 210/002

Betriebsanleitung engl. 03.12

Table of Contents

Need help?

Do you have a question about the Seam and is the answer not in the manual?

Questions and answers

Summary of Contents for Pfaff Industrial Seam

Page 1 Seam test station INSTRUCTION MANUAL 296-12-19 210/002 Betriebsanleitung engl. 03.12...
Page 2 The reprinting, copying or translation of PFAFF Instruction Manuals, whether in whole or in part, is only permitted with our previous authorization and with written reference to the source. PFAFF Industriesysteme und Maschinen AG Hans-Geiger-Str. 12 - IG Nord D-67661 Kaiserslautern...
Page 3: Table Of Contents
Index Contents ..................Page Proper use..........................4 Speciﬁ cations ........................5 Disposal of Machine ......................6 Explanation of symbols ....................... 7 Controls ..........................8 Summary of controls (Version without pneumatics connection) ........... 8 Summary of controls (Version with pneumatics connection) ..........9 Preparation .........................
Page 4: Proper Use
Proper use Proper use The seam connections, which are sealed with a seam sealing tape, are checked at the seam test station for water-tightness in accordance with DIN 20811. The test is conducted for outdoor wear, ski, surﬁ ng and diving suits, and for shoes.
Page 5: Specifi Cations
Speciﬁ cations Speciﬁ cations Max. clearance underneath test plates: ............. approx. 38 mm Fill water: ......................distilled water Dimensions: Length: ......................approx. 450 mm Width: ......................approx. 300 mm Height ......................approx. 620 mm Connection data: Pressure min.: ........................1 bar Pressure max.: ........................
Page 6: Disposal Of Machine
Disposal of Machine Disposal of Machine ● Proper disposal of the device is the responsibility of the customer. ● The materials used for the machine are steel, aluminium, brass and various plastic materials. The electrical equipment comprises plastic materials and copper. ●...
Page 7: Explanation Of Symbols
Arbeitssymbole Explanation of symbols In this instruction manual, work to be carried out or important information is accentuated by symbols. These symbols have the following meanings: Note, information Cleaning, care Lubrication Maintenance, repairs, adjustment, service work (only to be carried out by technical staff)
Page 8: Controls
Controls Controls Summary of controls (Version without pneumatics connection) Fig. 5 - 01 ● Pressure plate 1. ● Clamping plate 2. ● Material clamping lever 3. ● Water tank 4. ● Manometer 5. ● Bleeder screw 6. ● Pump bellow 7. ●...
Page 9: Summary Of Controls (Version With Pneumatics Connection)
Controls Summary of controls (Version with pneumatics connection) Fig. 5 - 02 ● Pressure plate 1. ● Clamping plate 2. ● Material clamping lever 3. ● Water tank 4. ● Air stop cock 5. ● Pressure regulator 6. ● Manometer 7. ●...
Page 10: Preparation
Preparation Preparation Setting the test material thickness ● Screw on union nut 1. ● Insert the plastic plate or the lattice supplied depending on the material, and screw in place with the union nut 1. ● Loosen counter nut 2 and set the material thickness to be processes by turning the clamping plate 3.
Page 11: Testing
Prüfen Testing Testing (Version without pneumatics connection) Fig. 7 - 01 ● Place the material for testing underneath the clamping lever 1 and press down on the lever 2. ● Close bleeding screw 3. ● Generate the desired test pressure via the pump bellow 4. Open the bleeding screw 3 after the test process to depressurise the system.
Page 12: Testing (Version With Pneumatics Connection)
Prüfen Testing (Version with pneumatics connection) open closed Fig. 7 - 02 ● Place the material for testing underneath the clamping plate 1 and press down on the lever 2. ● Close the air stop cock 3. ● Connect compressed air at pressure reducer 4. ●...
Page 13: Maintenance
Maintenance Maintenance Maintenance intervals Lubrication .......................annually Manometer replacement ..................annually Lubrication Fig. 8 - 01 ● Lubricate guide 1 with a little grease once a year. Only use Gleitmo 585 M heavy duty grease, part no. 280-1-120 269. Manometer replacement ● The installed manometer has been tested and should be replaced once a year. ●...
Page 14: Parts List
Parts list Parts list 95-257 292-04/001 99-136 187-91 95-257 293-04/002 95-257 295-45 95-257 294-45 95-257 296-45 99-137 943-91 95-257 280-04/002 99-137 945-91 95-257 293-04/001 95-257 298-45 95-257 523-91 95-257 297-45 99-137 944-91 95-257 299-45 95-257 280-04/001 99-137 942-91 (4x)
Page 15 Note...
Page 16 PFAFF Industriesysteme und Maschinen AG Hans-Geiger-Str. 12 - IG Nord D-67661 Kaiserslautern Phone: +49 - 6301 3205 - 0 Fax: +49 - 6301 3205 1386 E-mail: info@pfaff-industrial.com Hotlines: Technical service: +49 - 175/2243-101 Application consultance: +49 - 175/2243-102 Spare-parts hotline: +49 - 175/2243-103 Printed in Germany...