Summary of Contents for DamoaTech DT-SMS01B
- Page 1 DamoaTech Soil Monitoring Sensor Install manual V.1 Written and Designed by Damoatech...
-
Page 2: Installation Overview
Installation overview FarmCLO_{Device_ID} Initialization Pag e (10,0,1,10) Scan Wifi Router Reboot Sensor HTTP POST Network settings Page Erase (AP mode) : Static IP Network (20.0.1.20) Sensor Settings Page Sensor Settings Page IP Address Output (Dynamic IP : (STA mode : 192.168.20.1) 192.168.20.X ) -
Page 3: Initial Settings
Initial settings Page 1 Sensor acts as Web Server • “FarmCLO_8caab5812120” Search for ap to connect dir • ectly (No passwd) • Access IP address : 10.0.1.10 • Ip address is set to the same because each sensor is • a server. - Page 4 Initial settings Page 2 1. Select the SSID you want 2. Password input 3. Save button press > Sensor reboot to connect...
- Page 5 Initial settings Page 3 Connect to 20.0.1.20 from a web “[AP]FarmCLO_8caab5812120” browser Search for ap to connect directly (No passwd) Check the individual IPs of the sensor...
- Page 6 • SSID Name : Connected SSID • Sensor Name : Sensor name = FarmCLO_{Sensor ID} • Server Address : HTTP Port with server address to p ost, the default value is the Damoatech server add ress. • Measuring cycle : Sensor measurement cycles settin g (15 to 180 minutes) •...
- Page 7 Network settings Page : Separate server users (DamoaTech Server users do not apply) • Sensor acts as Web Server • “[AP]FarmCLO_8caab5811254” Search for ap to connect directly (No passwd) • Access IP address : 20.0.1.20 • Ip address is set to the same because all sensors are Server.
-
Page 8: Sensor Settings Page
• Sensor Name : Sensor name = FarmCLO_{Sensor ID} • Server Address : HTTP SERVER ADDRESS TO POST • The default value is the Damoatech server address. • Measuring cycle : Sensor measurement cycles (15 to 180 minutes) • Temperature Offset (-10~10) •... - Page 9 • The product buyer can inform us of the product warranty or the number affixed to the top. • Email address : info@damoatech.com • Please provide the buyer's name, address, email address and contact information. • User IDs and passwords will be notified at we will inform you.
-
Page 10: How To Factory Reset
How to factory reset 1. Switch at 11 o'clock = Power Reset button 2. Switch at 9 o'clock = button for Factory Reset 3. Press and hold the 9 o'clock button and push and release the 11 o'clock button. 4. Release the 9-hour button when the blue LED is lit If the above methods don't work, 1. -
Page 11: Product Photos
Product Photos... -
Page 12: Product Specifications
Product Specifications Spec description Remarks Name Soil sensor Model DT-SMS01B Power voltage DC 5V (USB) Power consumption 0.1W ~ 0.5W Size 80(L) x 120(H) x 80(W) Weight 120g Battery, cable excluded Network interface WIFI 802.11b/g/n Frequency of use 2.4Ghz WIFI encryption... -
Page 13: Product Description
3. ADR method is amplitude analysis 4. The method used by DamoaTech uses a method of measuring dielectric permittivity like FDR. 4. The moisture value of the soil sensor represents the relative value, not the absolute moisture value of the soil. - Page 14 Failure occurs due to applied voltage outside the voltage range You have not followed the precautions set out in the instruction Thank you very much for purchasing DamoaTech's products. This manual. warranty promises to repair the products used as written in the...
- Page 15 Technical Inquiry Tel : +82-70-4369-0904 following two conditions: (1) This device E-mail : info@damoatech.com may not cause harmful interference, and (2) this device must accept any Please contact us for other undeterred details and we will respond interference received, including to them.