Download Print this page

Omnitron Systems FlexPoint 4385 User Manual

48vdc power-redundant 14-module chassis

Advertisement

Quick Links

FlexPoint
Powered Chassis
TM
48VDC Power-Redundant
14-Module Chassis
User Manual
38 Tesla Irvine, CA 92618
(949) 250-6510; Fax: (949) 250-6514
General and Copyright Notice
This publication is protected by U.S. and international copyright laws. All rights
reserved. The whole or any part of this publication may not be reproduced, stored
in a retrieval system, translated, transcribed, or transmitted, in any form, or by
any means, manual, electric, electronic, electromagnetic, mechanical, chemical,
optical or otherwise, without prior explicit written permission of Omnitron Systems
Technology, Inc.
The following trademarks are owned by Omnitron Systems Technology, Inc.:
FlexPoint
, FlexSwitch
, HybridNID
TM
TM
OmniLight
, OmniConverter
, RuggedNet
®
®
OST
and the Omnitron logo.
TM
All other company or product names may be trademarks of their respective owners.
The information contained in this publication is subject to change without notice.
Omnitron Systems Technology, Inc. is not responsible for any inadvertent errors.
Warranty
This network product and the included AC/DC power adapter are warranted to the
original purchaser (Buyer) against defects in material and workmanship for a period
of two (2) years from the date of shipment. The warranty for the network product
can be extended to lifetime by registering the product at www.omnitron-systems.
com/support within ninety (90) days from the date of shipment. During the warranty
period, Omnitron will, at its option, repair or replace a product which is proven to be
defective with the same product or with a product with at least the same functionality.
For warranty service, the product must be sent to an Omnitron designated facility,
at Buyer's expense. Omnitron will pay the shipping charge to return the product
to Buyer's designated US address using Omnitron's standard shipping method.
Limitation of Warranty
The foregoing warranty shall not apply to product malfunctions resulting from
improper or inadequate use and/or maintenance of the equipment by Buyer, Buyer-
supplied equipment, Buyer-supplied interfacing, unauthorized modifications or
tampering with equipment (including removal of equipment cover by personnel not
specifically authorized and certified by Omnitron), or misuse, or operating outside
the environmental specification of the product (including but not limited to voltage,
ambient temperature, radiation, unusual dust, etc.), or improper site preparation
or maintenance.
No other warranty is expressed or implied. Omnitron specifically disclaims the implied
warranties of merchantability and fitness for any particular purpose.
The remedies provided herein are the Buyer's sole and exclusive remedies. Omnitron
shall not be liable for any direct, indirect, special, incidental, or consequential
damages, whether based on contract, tort, or any legal theory.
Environmental Notices
The equipment covered by this manual must be disposed of or recycled in
accordance with the Waste Electrical and Electronic Equipment Directive (WEEE
, iConverter
, miConverter
, NetOutlook
®
®
TM
, Omnitron Systems Technology, Inc.
®
Page 2
,
®
,
TM

Advertisement

loading

Summary of Contents for Omnitron Systems FlexPoint 4385

  • Page 1 Omnitron Systems Technology, Inc. The following trademarks are owned by Omnitron Systems Technology, Inc.:...
  • Page 2 Fax: (949) 250-6514 • 14 screws for L Shape Brackets Address: Omnitron Systems Technology, Inc. • User Manual 38 Tesla Inspect equipment and immediately report any damage or discrepancies to Omnitron at 949-250-6510. If equipment is damaged, do not apply power to the equipment.
  • Page 3 rack assembly, the operating ambient temperature of the rack must not exceed the maximum rated temperature for the chassis used. WARNING REGARDING EARTHING GROUND: This equipment shall be connected to the DC supply Installation of the equipment should be such that the air flow in the front and back system earthing electrode conductor or to a bonding of the unit is not compromised or restricted.
  • Page 4 Specifications removal and installation steps must be strictly followed in order to prevent serious injury or death or serious damage to your equipment. Removal of power supplies Regulatory Compliances UL, CE, FCC Class A or modules will result in access to hazardous electricity. Environmental RoHS, WEEE, REACH 38 to 60VDC, 3.0A @ 48VDC...

This manual is also suitable for:

Flexpoint 4386Flexpoint 4389