Advertisement
Directive) of the European Community directive 2012/19/EU on waste electrical and
electronic equipment (WEEE) which, together with the RoHS Directive 2015/863/
EU, for electrical and electronic equipment sold in the EU after July 2019. Such
disposal must follow national legislation for IT and Telecommunication equipment
in accordance with the WEEE directive: (a) Do not dispose waste equipment with
unsorted municipal and household waste. (b) Collect equipment waste separately.
(c) Return equipment using collection method agreed with Omnitron.
The equipment is marked with the WEEE symbol shown to indicate that it
must be collected separately from other types of waste. In case of small items the
symbol may be printed only on the packaging or in the user manual. If you have
questions regarding the correct disposal of equipment go to www.omniton-systems.
com/support or e-mail to Omnitron at intlinfo@omnitron-systems.com.
Safety Warnings and Cautions
ATTENTION: Observe precautions for handling electrostatic discharge
sensitive devices.
WARNING: Potential damage to equipment and personal injury.
WARNING: Risk of electrical shock.
Customer Support Information
Phone:
(949) 250-6510
Fax:
(949) 250-6514
Address:
Omnitron Systems Technology, Inc.
38 Tesla
Irvine, CA 92618, USA
Email:
support@omnitron-systems.com
URL:
www.omnitron-systems.com
040-04385-001C 8/22
Page 3
FlexPoint™
14-Module DC Power Chassis
User Manual
Product Overview
The FlexPoint Powered Chassis is a chassis capable of holding up to 14 FlexPoint
media converter modules. It is equipped with two power supplies in a power-
redundant configuration.
14-Module Chassis
This User Manual describes the following models:
Model
Model Type
Number
FlexPoint 14-Module Chassis with
4385
two 48VDC Power Supplies
FlexPoint 14-Module Chassis with
4386
one 48VDC Power Supply
4389
Spare 48VDC Power Supply for Listed Chassis
Unpacking, Visual Inspection and Inventory
Review the contents. The following items should be included:
•
FlexPoint 14-Module Power Chassis
•
1 or 2 power supplies depending on the model ordered
•
14 L Shape Brackets to secure modules to chassis
•
14 screws for L Shape Brackets
•
User Manual
Inspect equipment and immediately report any damage or discrepancies to Omnitron
at 949-250-6510. If equipment is damaged, do not apply power to the equipment.
Rack Mounting
Mount and attach the chassis to the rack using the appropriate rack mounting
screws (not provided).
The rack should be appropriately earth-grounded.
The operating temperature of this equipment is 0 to 50 degrees C or -40 to 60
degrees C depending on the model number. If installed in a closed or multi-unit
Power Description
Direct DC 3-Pin Terminal,
+/- 38 to 60VDC, 3.0A @ 48VDC
Direct DC 3-Pin Terminal,
+/- 38 to 60VDC, 3.0A @ 48VDC
Direct DC 3-Pin Terminal,
+/- 38 to 60VDC, 3.0A @ 48VDC
Page 4
Advertisement
