Table of Contents
Advertisement
General Instructions
Installation Position
7
SM720 Capacitive Level Transmitter
3 Installation
When installing the SM720 sensor please check that the fitting
and the sensor material is suitable for the product and the vessel.
Install the sensor in a place that is easy to reach for connection
and calibration steps.
DON'T try to screw the sensor by holding the head doing this will
damage the sensor from inside and damage its electronics.
Instead screw the sensor by using a hexagonal key.
The sensor is installed vertically from above the vessel.
In case of wide diameter vessels choose a place that is 30-40 Cm
from the vessel wall to achieve the best accuracy.
Fig.3: Installing Position
Alex Electronics Co.
Advertisement
Table of Contents
