E-Pill WatchMinder2 Quick Start Instructions

Thank you for purchasing the WatchMinder2. In order to quickly get the WatchMinder operational, you
will first need to set the time/date and then turn the vibration feature to "on." Please follow these steps and
then follow the final directions to set training and reminder alerts.
1. Start by pushing and holding down TRAIN/SET, then immediately push TMR.
2. Y will appear with a number blinking. Push + or – to adjust the Year up or down. Push REMIND to set Year.
3. M will appear with a number blinking. Push + or – to adjust the Month up or down. Push REMIND to set Month.
4. D will appear with a number blinking. Push + or – to adjust the Day up or down. Push REMIND to set Day.
5. W will appear. DO NOT PUSH + or - . Immediately push REMIND.
6. H will appear with a number blinking. Push + or – to adjust Hour up or down. This is a 24 hour clock, so add 12 to
the PM time (2pm is 14). Push REMIND to set Hour.
7. M will appear with a number blinking. Push + or – to adjust Minutes up or down. Push REMIND to set Minute.
8. S will appear with a number blinking. Push + or – to adjust Seconds up or down. Push TRAIN to set Second.
The correct Time and Date will appear.
1. Start by pushing and holding down REMIND, then immediately push SW.
2. B (bell alert) will appear with OFF blinking. Push REMIND.
3. V (vibration alert) will appear with OFF blinking. Push + or - and ON will appear. Push TRAIN.
Vibration alert is set and icon will appear at bottom of screen.
WatchMinder2 Quick Start Instructions
I. First Step: Set the Time and Date
II. Second Step: Turn Vibration On
OVER