User Manual
Hot Air Brush
Model No. :EF602
Product ID:YRV1-MGFS-602-VL-001
IMPORTANT SAFETY INSTRUCTIONS
When using electrical appliances, especially when children are
present, basic safety precautions should always be followed,
including the following:
READ ALL INSTRUCTIONS BEFORE USING.
KEEP AWAY FROM WATER
DANGER -
As with most electrical appliances, electrical parts are
electrically
live even when switch is off. To reduce the risk of death by
electric shock:
• Always unplug this appliance from the electrical outlet
immediately after using.
• DO NOT use while bathing or in the shower.
• DO NOT place or store this appliance where it can fall or be
pulled into a tub or sink.
• DO NOT place or drop into water or other liquid.
• DO NOT reach for an appliance that has fallen into water.
Unplug it immediately. Do not reach into the water.
• Unplug this appliance before cleaning it.
WARNING-To reduce the risk of burns, fire, electric shock
or injury to persons:
• DO NOT use this appliance near bathtubs, showers, basins
or other vessels containing water.
• An appliance should never be left unattended when it is
plugged in.
• Close supervision is necessary when this appliance is used
by, on, or near children or individuals with certain disabilities
or special needs.
• Use this appliance only for its intended use as described in
this manual. Do not use attachments not recommended by the
manufacturer.
• NEVER operate this appliance if it has a damaged cord or
plug, if it is not working properly, if it has been dropped or
damaged, or if it has been dropped into water. Contact the
service center for examination and repair.
• Keep the cord away from the heated surfaces. Do not wrap
the cord around the appliance.
• NEVER use while sleeping.
• NEVER drop or insert any object into any of the appliance's
openings.
• DO NOT use outdoors or operate where aerosol (spray)
products are being used, or where oxygen is being
administered.
• DO NOT use with an extension cord.
• If the hair dryer is used in a bathroom, unplug it immediately
after use. The proximity of water presents a hazard even
when the hair dryer is switched off; for additional protection,
the installation of a residual current device (RCD) having a
rated residual operating current not exceeding 30mA is
advisable in the electrical
circuit supplying the bathroom. Ask your electrician for advice.
• This appliance is hot when in use. Do not let eyes or bare
skin touch heated surfaces.
• DO NOT place the heated unit directly on any surface while
it is hot or plugged in.
• Always store this appliance and cord in a moisture-free area.
Do not store it in temperatures exceeding 140°F (60°C).
• This appliance is for household use only.
• DO NOT plug or unplug this appliance when your hands are
wet.
• NEVER block the air openings of the appliance or place it on
a soft surface, such as a bed or couch, where the air openings
may be blocked. Keep the air openings free of lint, hair and
the like.
• DO NOT direct hot air toward the eyes or other heat
sensitive areas.
• Attachments may be hot during use. Allow them to cool
before handling.
• While using the appliance, keep your hair away from the air
inlets.
• DO NOT operate with a voltage converter.
• DO NOT use this dryer to dry a wig (or brush) made of
2
something that may burn easily.
• DO NOT use this dryer to dry a wig (or brush) that has been
cleaned in something that may burn if it may still have some of
the cleaner on or in it.
KEEP AWAY FROM CHILDREN
SAVE THESE INSTRUCTIONS• This appliance is equipped
with an automatic thermal limiter, which will cycle off when
overheated and come back on when cooled down. If the unit
cycles off, unplug the cord for several minutes before
restarting.
• This appliance features a polarized plug with one blade
wider than the other. As a safety feature, this plug will fit in a
polarized outlet only one way. If the plug does not fit fully in
the outlet, reverse the plug. If it still does not fit, contact a
qualified electrician. Do not attempt to defeat this safety
feature.
ALCI Safety Device
This hair dryer is provided with an appliance leakage circuit
interrupter (ALCI) safety device built into the plug. This device
is designed to make the unit inoperable under some abnormal
conditions, such as accidental immersion in water. The ALCI
safety device is equipped with a test button so that its
operation can be checked. This unit should be tested before
each use to confirm that the safety device is operational.
To test:
After plugging in your hair dryer:
1. Press the reset button on the ALCI device.
2. Press the test button. The reset button will pop out. This
verifies that the safety device is operating properly.
3. Press the reset button to reactivate your ALCI safety
device.
4. Your hair dryer is now ready for use.
This unit may automatically trip when unplugged. If so, the unit
must be reset after it is plugged in. If the dryer doesn't reset
after following the above testing procedure, contact the
manufacturer.
Should the ALCI safety device trip (i.e., reset button pops out)
during use, press the reset button. Should the hair dryer fail to
reset, contact the manufacturer. Never operate this appliance
if it has been dropped in water.
3
Need help?
Do you have a question about the EF602 and is the answer not in the manual?
Questions and answers