Advertisement
Quick Links
All Around Dress-Up Center
Follow these directions to assemble your new dress-up center. All you'll need is a Phillips screwdriver; we've
provided all of the hardware. Because the pieces are bulky, you'll need another adult to help you.
What's Included
base
bottom
hooks (10)
Assembly Instructions
1
Position the mirror panel (A) between
the raised bars on the bottom. Then
place the other section panels on the
bottom. (When the panels are posi-
tioned together, A & B will create one
section, C & D will create the section for
the shelves, and E & F will create the
section for the hooks.) Make sure that
the pilot holes for the hooks are posi-
tioned toward the top of the panels.
©2009 Lakeshore
(800) 428-4414
www.lakeshorelearning.com
mirror panel (A/F)
shelf panel (B/C)
top
Holes at top
for hooks
hook panel (D/E)
shelves (4)
1
Hardware
1" small round head
screws (20) G
1
⁄
" round head
1
2
screws (28) H
1" large round head
screws (6) I
FF417
Ages 3+
Printed in China
Advertisement
Summary of Contents for Lakeshore FF417
- Page 1 C & D will create the section for the shelves, and E & F will create the section for the hooks.) Make sure that the pilot holes for the hooks are posi- tioned toward the top of the panels. FF417 ©2009 Lakeshore Ages 3+ (800) 428-4414 www.lakeshorelearning.com...
- Page 2 Position the shelves in place, starting at the Place the top of the unit onto the panels. bottom of the panels (C & D). Insert one of the Secure the top of the unit with 6 (H) flat head screws (H) through the outside pilot screws.
- Page 3 Once the base is secured, place the center back Position a hook over the pre-drilled pilot in the upright position. holes and insert 2 (G) screws. Use the screw- driver to tighten the screws securely. Be sure not to overtighten the screws. Repeat for the remaining hooks.