Advertisement
Quick Links
PCD-FDE2 Setup Guide
Connection diagram
Connections
1. Connect the Power cable from the PCD-FDE2 mini-USB connector to the USB power adapter
using the supplied cable.
2. Connect the included USB / Serial cable to the USB connector of the PCD-FDE2, and the
other side to the Russound controller (DB9 connector) Note: If you are connecting a Russound
CAV, you must change the RS232 switch to the rear position.
3. Connect the included Ethernet cable to either (LAN or WAN) RJ45 connector on the PCD-
FDE2, and the other side to your wireless router.
Advertisement
Summary of Contents for Perkins Innovation Russound PCD-FDE2
- Page 1 PCD-FDE2 Setup Guide Connection diagram Connections 1. Connect the Power cable from the PCD-FDE2 mini-USB connector to the USB power adapter using the supplied cable. 2. Connect the included USB / Serial cable to the USB connector of the PCD-FDE2, and the other side to the Russound controller (DB9 connector) Note: If you are connecting a Russound CAV, you must change the RS232 switch to the rear position.
- Page 2 You should now be able to start the My Russound app and control all six zones of your Russound controller. You now need to configure your zone names, source names and source types. Configure Zone Source Names, and Source Types: 1.
- Page 3 3. Enter default password: russound123 4. Select Zones from the pulldown menu, Set your zone names and click on "Save & Apply"...
- Page 4 5. Select Sources from the pulldown menu, Set your source names and source types, then click on "Save & Apply"...
- Page 5 You can now change your phone back to your home network, and begin using the MyRussound App.