Advertisement
Speed Gates
LOOP
LS 170
FEATURES
•
Speed gate with fast-opening swing barrier wings made of 10 mm tempered
glass.
•
Stainless steel or powder coated housing with tempered glass infill panels.
•
10 mm tempered glass top lid.
•
Illuminated indication pictograms.
•
DC motor driven.
FUNCTIONS & INTERFACE
•
Logic controlled interface, bi-directional operation
•
Entrance and exit directions can be individually set as controlled, locked or free
before or after the installation.
•
In controlled access mode, after release confirmation which was sent by access
control system, the gate opens the barrier wings and enables one person access
in the direction of travel. After each person, the barrier wings blocks passage
again and does not permit access from both entrance and exit directions until
receiving a new release signal from the access control system.
•
After the release, the gate closes the barrier wings after an adjusted time if no
transition or passage occures.
•
If people from both directions would like to pass through simultaneously, the
first person who activates the gate takes precedense.
Multiple opening: An additional person is able to to release the next passage
•
cycle during an ongoing passage cycle in both directions. The gate controller
stores up to 255 releases and lets corresponding number of individuals pass
through.
•
Relay outputs for counting passage in either direction
•
RS 232 serial port
•
Control for inputs and outputs via potential-free contact
EMERGENCY & POWER CUT
In the event of emergency the gate opens the barrier wings (fail-safe). During
power-cut the mechanism and barrier wings do not operate (fail-locked). The
gate reset itself automatically when the emergency alarm stops or the power is
switched back on.
LED INDICATORS
LED lights indicates the operating status of the turnstile in both directions.
ACCESS CONTROL INTEGRATION
•
Loop LS 170 can be controlled by any kind of access control system through dry
contact or COM ports.
•
Optional cuts on glass top is available for surface mount readers, reader holders
or stands as well as standard or custom designed posts for access controller
integration.
•
RFID Icon positioned in the middle of reader installation area to indicate the card
reader position clearly.
•
An additional indicator on top illuminates in red when the gate is locked and
changes to green for confirmed passages or during free passage.
SETTINGS
Operation mode for each directions
Acoustic Notifications
Release time out
Consecutive passage
Emergency connection
SPECIFICATIONS:
Construction: Steel
Passage width: 900 mm
Cabinet size (W x L x h): 171 x 1241 x 1019 mm
Weight: 115 Kg
Power Supply: 100 - 240 VAC, 50/60 Hz
Logic Voltage: 24V DC
Operation Temperature: -0° / +70°
IP Protection: Cabinet IP44
OPTIONS, CUSTOMIZATION & ACCESSORIES:
•
Arylic barrier wings.
•
Logo on glass and arylic barrier wings.
•
Stainless steel base plate.
•
Card inserter.
•
Back-up battery 7A.
•
Access controller integration options and brackets.
(Please contact with sales represantative for full list of options and accessories)
: Controlled / Free / Locked
: On/Off
: 5-10-15-20 secs
: On/Off
: On/Off
Advertisement
