Advertisement
Quick Links
GSM modem
Instructions Manual
PREFACE
Thanking you for preference, TECNOELETTRA SRL hopes that the use of this equipment could be a reason of
satisfaction. This manual is designed to put you in a position to intervene on the equipment and different performs of
installation and connection. In order to ensure efficient operation and durability, it is recommended the strict observance of
the rules laid down here. Thanks in advance for the suggestions that we will be given to possible further improvements of
the equipment. For any question always consult the TECNOELETTRA Technical Department.
TECNOELETTRA S.r.l.
Note:
The manufacturer reserves the right to modify equipment for any manufacturing or commercial need, without the
obligation to promptly update this installation and using manual.
This manual cannot be modified without authorization by TECNOELETTRA.
This material is the exclusive property of TECNOELETTRA, and cannot be used or disclosed for purposes other than those
contractual.
GSM-TE809-EN_rev2.doc
Page 1/8
Advertisement
Summary of Contents for tecnoelettra TE809
- Page 1 The manufacturer reserves the right to modify equipment for any manufacturing or commercial need, without the obligation to promptly update this installation and using manual. This manual cannot be modified without authorization by TECNOELETTRA. This material is the exclusive property of TECNOELETTRA, and cannot be used or disclosed for purposes other than those contractual. GSM-TE809-EN_rev2.doc...
- Page 2 1- 1.4 SIM card settings ....................................4 1- 1.5 LED diagnosis....................................4 1- 1.6 On-board settings ....................................4 1- 2 SMS command and control ..............................5 1- 2.1 Phone numbers setting ..................................5 1- 2.2 SMS commands ....................................5 GSM-TE809-EN_rev2.doc Page 2/8...
-
Page 3: Gsm Communication
1- GSM COMMUNICATION 1- 1 GSM Preliminary connection instructions The controller is equipped with a TE809 GSM system easy to use. 1- 1.1 Serial cable connection You can easily connect the GSM modem through the serial cable 9 poles (code 51C3) male-female. - Page 4 - GSM signal absent or very low, try to change the place where the antenna is located 1- 1.6 On-board settings It’s necessary to configure the serial port of the TE809 for the GSM communication (see Connectivity setup of TE809): If you use the RS232 port:...
- Page 5 To set up mobile phone numbers which the board must send TE809 closes the generator contactor the messages to, it’s necessary to send to the TE809 a SMS TE809 shows the alarm “system block” (set for message that contains the number that you want to enable.
- Page 6 GSM-TE809-EN_rev2.doc Page 6/8...
- Page 7 GSM-TE809-EN_rev2.doc Page 7/8...
- Page 8 Authorized distributor GSM-TE809-EN_rev2.doc Page 8/8...
Need help?
Do you have a question about the TE809 and is the answer not in the manual?
Questions and answers