Advertisement
Top
Half
Bottom
Half
Step 1
Turn on Main Power Switch:
Turn on to enable the front
Power Button. Turn off when
you travel with the unit to
disable the front Power
Button.
Add Salt: Grasp the bottom half and pull off the
top half. They are held together with magnets!
Pour a 6 gram pack of salt into the grinding barrel.
To re-assemble the unit, line up the stainless steel
front panels and replace the top half.
Press the front power button and enjoy healthier living!
The unit is programmed to run for 5 minutes.
ISR-PRO
Quick Start Guide
5 Steps to Healthier Living
Fan
Assembly
Power
Button
Low Battery
Indicator
ON
Charge the ISR-PRO: Plug the Wall
Adapter into the Power Adapter Port and into a
standard wall outlet.
Unit takes 6 hours to fully charge. While charg-
ing, the Low Battery Indicator will slow flash.
You can still use the unit while it is charging!
Step 3
Step 4
Bottom View
Step 2
Pour 1 packet of salt in here
Main Power
Switch
Power Adapter
Port
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Infinity ISR-PRO
Summary of Contents for Infinity ISR-PRO
- Page 1 Bottom View Port Step 1 Step 2 Turn on Main Power Switch: Charge the ISR-PRO: Plug the Wall Adapter into the Power Adapter Port and into a Turn on to enable the front standard wall outlet. Power Button. Turn off when you travel with the unit to Unit takes 6 hours to fully charge.
- Page 2 Reverse procedure to re-assemble. Clean Middle Section (see below). Clean Fan Assembly (see below). Re-assemble the ISR-PRO and it is ready to go! Cleaning the Middle Section: Remove as much salt residue as possible with the supplied Clean the flat contacts, too. If brush.
Need help?
Do you have a question about the ISR-PRO and is the answer not in the manual?
Questions and answers