ADTRAN HDSL Central Office Installation Kit Installation And Maintenance Manual

CONTENTS
1. GENERAL .......................................................... 1
2. OPERATION...................................................... 2
3. TESTING ............................................................ 4
4. SPECIFICATIONS ............................................ 6
5. MAINTENANCE ............................................... 7
6. WARRANTY AND CUSTOMER SERVICE ... 7
FIGURES
Figure 1. HDSL CO Installation Shelf ...................... 1
Figure 2. HDSL Circuit Simulation .......................... 2
Figure 3. Front Panel Features .................................. 2
Figure 4. Rear Panel Feature ..................................... 3
Figure 5. Pairing CO Installation Kit ........................ 3
Figure 6. Test Cables ................................................. 4
Figure 7. Testing Line Units ..................................... 5
Figure 8. Pairing a Circuit ......................................... 5
Figure 9. T1 BERT Testing of an HDSL Circuit ...... 6
TABLES
Table 1. Line Units .................................................... 5
Table 2. Specifications .............................................. 6
Table 3. Ordering Guide for the CO Shelf ................ 6
Table 4 Ordering Guide for the Remote Shelf ......... 7

1. GENERAL

This practice provides installation and operation
procedures for the ADTRAN HDSL Installation Kit
for the Central Office. The HDSL CO Installation Kit
is designed for use with the ADTRAN HDSL Remote
Installation Kit, part number 1190851L1. Figure 1 is
an illustration of the HDSL Central Office Installation
Shelf. This kit can house any standard 220 mechanics
card to include T1, HDSL, and HDSL2. This practice
is written around the HDSL application.
Revision History
This is the initial release of this document. Future
revisions to this document will be explained in this
subsection.
61190852L1-5A
HDSL Central Office Installation Kit
Installation and Maintence
61190852L1-5, Issue 1
Trademarks: Any brand names and product names included in this document are
trademarks, registered trademarks, or trade names of their respective holders.

Figure 1. HDSL CO Installation Shelf

Features
The HDSL Installation Kit for the Central Office, part
number 1190852L1, includes the following features:
• Compact Construction Installation Unit.
• Local AC powering.
• Houses a standard 220 CO card, with optional
3192 and DDM Plus adapter cards.
• Bantam to alligator connections.
• Versatile protective carrying case.
The HDSL CO Installation Kit simulates the operation
of the central office end of an HDSL circuit (with
installed CO line unit).
Make-or-break and signal jacks in each Installation
Kit provide access to the HDSL circuit's loop 1 and
loop 2 signals. Inserting a test cable into a jack breaks
the HDSL circuit at that point and delivers the signal
out of the jack. The jacks can be used to insert an
HDSL Installation Kit into an HDSL circuit at
different points (such as the central-office end or
remote end) in order to test circuit or line unit
operation.
Section 61190852L1-5A
Issue 1, December 1999
CLEI # T1TSSR0F _ _
2
LP 1 LP
RX
TX
HD SL
DS 1
M
H T U -C
1L 2
12 46 00
13 3
0
26 6
EX T
DSX -1 39 9
LBO
53 3
AMI
w e r
B8ZS UFRM
C O P o
FRM
SF
ESF
EN
NIU LB DIS EN
DIS
LB TIME OUT
TX
DSL
M
O
N
DSX RX
ALM
TX
E
LBK
Q
NG
RX W AR NI
IA LL Y
PO TE NT
O US
HA ZA RD
BE
ES M AY
VO LT AG
T AT AL L
PR ES EN JA CK S
PA NE L
FR O NT
ES D
G N D
G N D
2L 1
11 90 85
1