All rights reserved Jupiter Avionics Corporation (JAC) permits a single copy of this manual to be printed or downloaded for the express use of an installing agency. Any such electronic or printed copy of this manual must contain the complete text of this copyright notice.
Page 3
JA73-001 Tray Mount Glove Box - 3 Inches High Installation Manual Table of Contents SECTION 1 - DESCRIPTION ............................1 System Overview .............................. 1 Features Overview ............................1 Specifications ..............................1 1.3.1 Mechanical Specifications ........................1 SECTION 2 – INSTALLATION ............................2 Introduction ...............................
The JA73-001 Tray Mount Glove Box – 3 Inches High allows the aircraft owner/operator to utilise an unused portion of the instrument panel for temporary storage. Features Overview The JA73-001 interior has a black anodized finish and the front plate has a baked-on flat black urethane paint finish to resist scratches and nicks during use. The JA73-001 fits a standard 6.25”...
Introduction This section contains unpacking and inspection procedures, installation information, and post-installation checks. Continued Airworthiness Maintenance of the JA73-001 is on condition only. Scheduled inspection and/or periodic maintenance of this unit is not required. Unpacking and Inspecting Equipment Unpack the equipment carefully. Check for shipping damage and report any problems to the relevant carrier. Confirm that the Authorized Release Certificate or Certificate of Conformance is included.