Download
Share
Print this page
  1. Manuals
  2. Brands
  3. CHIEF Manuals
  4. Tools
  5. 64518
  6. Owner's manual & safety instructions

CHIEF 64518 Owner's Manual & Safety Instructions

Professional 1/4" air hydraulic riveter
Hide thumbs

Advertisement

Quick Links

Download this manual
Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual (or month and year of purchase if product has no number). Keep this manual and the
receipt in a safe and dry place for future reference.
Email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2018 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
22i
64518

Advertisement

loading
Need help?

Need help?

Do you have a question about the 64518 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for CHIEF 64518

  • Page 1 (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference. Visit our website at: http://www.harborfreight.com 64518 Email our technical support at: productsupport@harborfreight.com When unpacking, make sure that the product is intact and undamaged.

  • Page 2: Table Of Contents

    2. Do not operate the tool in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. The tool is able to create sparks resulting in the ignition of the dust or fumes. Page 2 For technical questions, please call 1-888-866-5797. Item 64518...

  • Page 3: Safety

    Item 64518 For technical questions, please call 1-888-866-5797. Page 3...
  • Page 4 Cubic Feet per Minute flow WARNING marking concerning ScFM at standard conditions Risk of Respiratory Injury. Wear NIOSH-approved dust mask/respirator. National pipe thread, tapered WARNING marking concerning Risk of Explosion. National pipe thread, straight Page 4 For technical questions, please call 1-888-866-5797. Item 64518...
  • Page 5 6. Do not lay the tool down until it has come to a complete stop. Moving parts can grab the surface and pull the tool out of your control. SaVE tHESE inStructiOnS. Item 64518 For technical questions, please call 1-888-866-5797. Page 5...

  • Page 6: Specifications

      3 /16″    5 /32″    1 /8″ • • • Rivet Pin Capacity (Nosepiece change needed) components and controls Lanyard Loop nosepiece Outer cylinder trigger pin cap air inlet Page 6 For technical questions, please call 1-888-866-5797. Item 64518...

  • Page 7: Operation

    The air hose must be long enough to reach fashion after disconnecting to ensure that the the work area with enough extra length to tool is disconnected and not powered. allow free movement while working. Item 64518 For technical questions, please call 1-888-866-5797. Page 7...
  • Page 8 Page 8 For technical questions, please call 1-888-866-5797. Item 64518...
  • Page 9 Item 64518 For technical questions, please call 1-888-866-5797. Page 9...
  • Page 10 (not included) into the Grip Housing at the bottom of the Air Cylinder. The fill level should only reach the top of the Grip Housing. Hydraulic Grip Housing Fluid air cylinder Page 10 For technical questions, please call 1-888-866-5797. Item 64518...
  • Page 11 When drilling rivet holes in a 7. Insert the rivet through the predrilled workpiece, use the same diameter drill bit as hole in the workpiece. the outer diameter of rivet being used. Item 64518 For technical questions, please call 1-888-866-5797. Page 11...
  • Page 12 Jaw cleaning and replacement 1. Unscrew and remove the Outer 2. Unscrew and remove the Jaw Case Cylinder using the Wrench. from the Jaw Cylinder. 3. Remove the Jaws from the Jaw Case. Page 12 For technical questions, please call 1-888-866-5797. Item 64518...
  • Page 13 Rivet pin not properly released Loosen Riveter’s Jaw Case and use proper size rivet. deformed in during installation. workpiece. Follow all safety precautions whenever diagnosing or servicing the tool. Disconnect air supply before service. Item 64518 For technical questions, please call 1-888-866-5797. Page 13...

  • Page 14: Parts List And Diagram

    If product has no serial number, record month and year of purchase instead. note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Specify UPC 792363645188 when ordering parts. Page 14 For technical questions, please call 1-888-866-5797. Item 64518...
  • Page 15 Diagram 19-1 6-1A 10-1 30-1 30-2 30-3 Item 64518 For technical questions, please call 1-888-866-5797. Page 15...

  • Page 16: Warranty

    Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.