Promaker PRO-RM850KIT User Manual page 2

Hammer Safety Warnings
*Wear ear protectors. Exposure to noise can
cause hearing loss.
*Use auxiliary handle(s), if supplied with tools.
Loss of control can cause personal injury.
*Hold the tool by the insulated gripping
surfaces when performing operations where
the application tool or the screw could contact
hidden wiring or its own power cord. Contact
with a "live" wire will also make exposed metal
parts of the power tool "live" and shock the
operator.
Additional Safety
Instructions
*Observe the mains voltage! The voltage of the
power source must correspond with the data on
the typo plate of the machine.
*Use appropriate detectors to determine if
the utility lines are hidden in the work or call
local utility company for assistance. Contact
with electric lines can lead to fire and electric
shock. Damaging a gas line can lead to explosion.
Penetrating a water line causes property damage.
*Firmly tighten the auxiliary handle, hold the
machine firmly with both hands while working
and keep proper footing and balance at all
times. The machine is securely guided with both
hands.
*Secure the workpiece. A workpiece clamped
with clamping devices or in a vice is held more
secure than by hand.
*To save energy, only switch the power tool on
when using it.
*For drilling without impact in wood, metal,
ceramic and plastic as well as for screwdriving,
tools without SDS-plus are used (e.g., drills with
cylindrical shank). For these tools, a keyless
chuck or a type drill chuck are required.
*The quick change chuck automatically locked.
Check the locking effect by pulling the quick
change chuck.
*Insert SDS-plus Drilling Tools: Check the
latching by pulling the tool.
*Replace a damaged dust protection cap
immediately. The dust protection cap largely
prevents the penetration of drilling dust into the
tool holder during operation. When inserting the
tool, pay attention that the dust protection cap is
not damaged.
and Working
*Dust from materials such as lead-containing
coatings, some wood types, minerals and
metal can be harmful to one's health and
cause allergic reactions, lead to respiratory
infections and/or cancer. Materials containing
asbestos may only be worked by specialist.
-As far as possible, use a dust extraction system
suitable for the material.
-Provide for good ventilation of the working place.
-It is recommended to wear a P2 filter-class
respirator.
Observe the relevant regulations in your country
for the materials to be worked.
*Prevent dust accumulation at the workplace.
Dust can easily ignite.
If the application tool should become blocked,
switch the machine off. Loosen the application
tool.
*Before switching on the power tool, make
sure that the application toll moves freely.
When switching on with a blocked drilling tool,
high torque reaction can occur.
*Always wait until the machine has come to a
complete stop before placing it down. The tool
insert can jam and lead to loss of control over the
power tool.
Symbols
The following symbols are important for reading
and understanding the operating instructions.
Please take note of the symbols and their
meaning. The correct interpretation of the symbols
will help you to use the machine in a better and
safer manner.
Symbol
PRO-RM850KIT Rotary Hammer
Meaning
2