Samsung AC TN4PKC Series User Manual page 16

Cleaning and Maintaining
Problem
The wired remote
control does not
operate.
The air conditioner
is not turned on or
off immediately
with the wired
remote control.
The Timed on/off
function does not
operate.
The indoor unit
display blinks
continuously.
I want to get cooler
air.
The air is not cool
or warm enough.
16
English
• Check whether the
remote control display. In this case, turn off both the air conditioner
and the auxiliary power switch, and then contact a service centre.
• Check whether the wired remote control is set for group control. In this
case, the air conditioners connected to the wired remote control are
turned on or off sequentially. This operation takes up to 32 seconds.
• Check whether you pressed the
after setting the on/off time. Set the on/off time.
• Turn on the air conditioner again by pressing the
• Turn off and then turn on the auxiliary power switch, and then turn on
the conditioner.
• If the indoor unit display is still blinking, contact a service centre.
• Operate the air conditioner with a common fan to save energy and
• In the Cool mode, cool air does not come out if the set temperature is
higher than the room temperature.
–
room temperature.
–
remote control. Then rotate the Wheel until the set temperature
• In the Heat mode, warm air does not come out if the set temperature is
lower than the room temperature.
–
room temperature.
–
remote control. Then rotate the Wheel until the set temperature
Solution
indicator is displayed at the bottom right of the
(SET) button on the remote control
(Power) button.