Better Homes and Gardens Canton BHS036158813001 Manual page 19

X
21. Turn the assembled drawer upright.
22. Pick up the 12" Ball Bearing Slides (X) and separate the slide runners for the following step. Extend the
slide runner all the way forward. Press the plastic release lever of the ball bearing slides up and pull the
slide runner complete out.
23. Using the pilot holes as a guide, attach the separated slide runners to the Middle Drawer Sides (Q1 and
Q2) respectively with three 12 mm Screws (8) per slide runner.
Middle Drawer Assembling
x 2
⑧ x 6
19
X
Q2
Q1
X
8
8
X
Q