Konica Minolta JS-505 Installation Manual

Hide thumbs

JS-505

INSTALLATION MANUAL

Applied Machines: C360/C280/C220/423/363/283/223

COLOR MFP: 36 ppm/28 ppm/22 ppm

MFP: 42 ppm/36 ppm/28 ppm/22 ppm

Product Code: A0ED/A1UD/A1UE/A1UF/A1UG

I. Accessory parts

No.

Name

Shape

1. Job separator

A083IXC001DA

2. Mounting cover

A083IXC027DA

3. Spacer A

A083IXC028DA

4. Spacer B

A083IXC029DA

5. Shoulder screw

A083IXC030DA

6. Screw A

(3 × 8 mm)

9738

7. Screw B

(3 × 16 mm)

4551IXC028DA

8. Installation

manual

4980IXC019DA

Job Separator

Q'ty

After unpacking, be sure to get rid of the

packaging materials and keep them out of

the reach of children.

Putting the head in the plastic bag

involves danger of suffocation.

Note:

This manual provides the illustrations of the acces-

sory parts and machine that may be slightly differ-

ent in shape from yours. In that case, instead of

the illustrations, use the appearance of your

machine to follow the installation procedure. This

does not cause any significant change or problem

with the procedure.

II. Installation procedures

1. Turn off the machine and unplug the power cord

from the power outlet.

2. Remove protective tape and shipping materials

and take out accessory parts.

3. Remove the protective vinyl bag from the hookup

cord.

1 set

4. Attach the supplied spacer A and spacer B to the

locations of the job separator as shown in the

illustration. (Each two supplied screw A's)

Note:

To attach the spacers, put the job separator upside

down on a flat surface.

Spacer A

5. Remove the output tray if it is mounted on the

machine.

* Remove it while pushing the claws of the output

tray in the direction of the allow ➀ shown on the

illustration and unhook.

➀

6. Peel seal off the machine.

A083IXC013DB

A083-9560-02

E-1

7. Peel seals off the machine. (Two seals)

Note:

Perform this step only when the machine has the

seals on the places shown in the illustration.

Spacer B

8. Remove the cover from the main body as shown

A083IXC031DA

in the illustration. (One screw)

➀

A083IXC006DB

A083IXC045DA

A083IXC032DB

< C360/C280/C220 >

83IXC033DA

< 423/363/283/223 >

A0HRIXC054DA

Table of Contents

Need help?

Do you have a question about the JS-505 and is the answer not in the manual?

Questions and answers

Summary of Contents for Konica Minolta JS-505

Page 1 JS-505 4. Attach the supplied spacer A and spacer B to the 7. Peel seals off the machine. (Two seals) Job Separator locations of the job separator as shown in the Note: INSTALLATION MANUAL illustration. (Each two supplied screw A’s)
Page 2 9. Remove the plate from the main body as shown 11. Install the job separator. 12. Secure the job separator to the machine by the 13. Connect the hookup cord to the machine. in the illustration. (Two screws) mounting cover. (The two supplied screw B’s) Note: <...