TECH iMPRESSiONS WorkEZ XL Quick Start Manual

Adjustable & Portable Laptop Stand with Mouse Tray

OVERVIEW:

Tech Impressions adjustable and portable laptop stand
with mouse pad "accordions" up and down, holding
laptops at a comfortable height and viewing angle. The
aluminum panel dissipates heat to help cool laptops.
- Each stand has 2 legs.
- Each leg has 3 segments.
- Each segment is connected with a push-button joint.

HOW TO OPERATE A LEG SEGMENT:

• To adjust a leg: press the button, rotate the leg to the
desired setting, release the button.
• Once the button is depressed, joints rotate in a complete
circle or 360°.
• The joint is locked when the button is extended. Only use
laptop stand when all joints are locked.
Depress the button
to adjust the leg.
• Joints lock in ~15˚ increments (marked with the numbers 0-23).
• Each joint button has an arrow that points to the locked setting.
ADJUSTMENT TIPS & TRICKS:
b
a
c
Disclaimer:
Buyer accepts full liability for any injury or loss to themselves, their property, and anyone else at any time and from any cause while using this product. Buyer
expressly releases Tech Impressions and its agents from any liability for such loss or injury. In no event shall Tech Impressions or its agents be liable for any
direct, indirect, punitive, incidental, damages or injury whatsoever arising out of or connected with the use or misuse of its products.
An extended button
means the joint is locked.

USING THE MOUSE PAD:

Insert mouse pad vertically
into the hole on the side of
the panel.
b
Step 1 - unfold A
Unfold
Step 3 - fold A
Folded
a
c

GUIDELINES:

• Max Load < 13 lbs
• Before use, ensure that:
1. All joints are locked (extended).
2. The platform is level.
3. Both legs are adjusted identically
and evenly.
4. Laptop stand is stable.
5. The platform weight is centered
over the bottom leg.
• Do not place any devices on the
panel until you affirm the above 5
steps and have pressed down firmly
on the panel to ensure Laptop
stand is stable.
WARNING!
PINCH POINT.
Keep hands and fingers
clear when adjusting.
Roll mouse pad to outside Adjust screw so mouse pad is
of the panel level.
Step 2 - unfold B Step 3 - unfold C
Step 2 - fold B Step 1 - fold C
B
C
A
Fold