Summary of Contents for Certified Tracking Solutions TITAN GPS CRX
Page 1
CRX RECORDER QUICK INSTALL GUIDE 8 ~ 40V CERTIFIED TRACKING SOLUTIONS LTE ANTENNA CRX RECORDER CALL TO TEST THE DEVICE BEFORE CLOSING UP DASH. FAILURE TO FOLLOW INSTRUCTIONS MAY DAMAGE EQUIPMENT AND VOID WARRANTY 1.780.391.3800 TOLL FREE 1.855.287.4477 (CTS4GPS) Getting Started MOUNTING BRACKET/COVER CAMERA INPUT CABLE GPS ANTENNA...
Page 2
CRX RECORDER QUICK INSTALL GUIDE STEP 2 STEP 4 CONNECT AND MOUNT CELLULAR MODEM CONNECT AND MOUNT EVENT BUTTON Connect the blue 4-pin molex connector to the USB2 BLUE connection point on the back of the We recommend consulting with the client as to their preferred mounting location recorder box Prepare/clean the surface Ensure modem is securely fastened...
CRX RECORDER QUICK INSTALL GUIDE Recommended Mounting Locations STEP 7 CONNECT CONSTANT POWER The CRX has various camera models offered which should be installed in an appropriate location. Here is a reference guide for the common models. The device requires a minimum 12V constant [Battery Power] on this line to function. [Max 24v]. Do not remove/bypass the fuse Connect the Red wire of the Power Cable harness to this constant source.
Page 4
CRX RECORDER QUICK INSTALL GUIDE STEP 10 CONNECT OTHER WIRING (AUDIO/VIDEO CABLE) – OPTIONAL STEP 12 ROUTE AND CONNECT HARNESSES If directed by the client, connect other optional wires as necessary. a) Route and connect GPS Antenna to “GPS” Input on CRX recorder box b) Route and connect Cellular Antenna to the 2 matching connectors on the Cellular Modem STEP 11 ROUTE AND CONNECT CAMERA(S)
CRX RECORDER QUICK INSTALL GUIDE STEP 14 CALL TO TEST STEP 16 ADMINISTRATIVE DETAILS To TEST the device, call us NOW! Give provided locking keys and any extra parts/accessories to the fleet owner/administrator. 1.855 287 4477 STEP 15 COMPLETE MOUNTING COVER Using the provided Phillips screws, slide the end Cover Plate over the connected wiring for the CRX Recorder Box Ensure that the wires are not being pinched or pulled.