ABM Smart ABM200 Quick Start Manual

Self Adjusting "Smart" Radar
2 Wire Measurement Sensors
FEATURES
Self Adjusting Tracking Radar
Simple push-button calibration
Output 4 - 20 mA / 20 - 4mA
Communication with "HART 7"
APPLICATIONS
Food and Beverages
Water / Wastewater
Chemicals with vapors
MECHANICAL
Conduit Entry
: 1/2" NPT x 2
Enclosure : Aluminum or S.S. - 94V0
Ingress Protection : NEMA 4 (IP65) Type 4 / 4X
: Special Order NEMA 6 (IP68)
ENVIRONMENTAL
Temperature : - 40 to 140°F (- 40 to 60°C)
Approvals : FCC Part 15 - Low Power
Communication Device
Installation Category : Class II
PROCESS
Temperature PP Rod :
De-coupler & PTFE Rod - 40 to 350°F (- 40 to 177°C)
Material Dielectric : Er >2
Max. Pressure : 5 bar (without De-coupler)
TECHNICAL SPECIFICATIONS
Radar Range RANGE
In Liquids
017 * - 17 ft.
* - 5 m
* - 33 ft.
033
* - 10 m
050 * - 50 ft.
* - 15 m
100 * - 100 ft.
* - 30 m
- 40 to 176°F (- 40 to 80°C)
RESOLUTION MOUNTING
0.08" 2.0",1 1/2" NPT
**
2.0 mm
0.15"
2.0",1 1/2
**
3.9 mm
0.22"
2.0",1 1/2
5.7 mm **
0.44" /
2.0",1 1 2
11 mm **
730 The Kingsway Peterborough , Ont. K9J6W6 Canada
Tel: (705) 740 — 2010
Fax: (705) 740 — 2563
OPTIONAL
Antenna Extension : 6" or 8" Lengths.
- Use only with Teflon Rod Antenna !
Refer to catalogue numbering Page for
ordering info.
High Temperature Unit :
- Teflon De-coupler threads on to
1 1/2" NPT Mtg. Adaptor with a
2" NPT Mtg. Process Connection.
OPERATIONAL
Operation : Pulse Radar
Accuracy
: +/-0.25% of max. range (typically in field )
Frequency
Loss of Echo
Loss of Echo
Current
Transmit Power : 50 uW average
Antenna
ELECTRICAL SPECIFICATIONS
ABM200 DC 16 to 30 VDC ,
"
NPT
Output 4-20 mA Output 6.1 uA resolution
"
NPT
Note - * Minimum Distance starts at the lower tip of the
antenna .
Note - ** Only 2" NPT Mounting available for High
"
NPT
Temperature Radar.
Catalogue #
& Refer to Catalogue Number Structure for Ordering
information. In Product Documentation refer to Page 4.
Web: www.abmsensor.com
E-mail: info@abmsensor.com
: +/- 0.1% of max. range (in lab using
4-20mA current output)
: 5.8 GHz or 6.3 GHz.
: 0 min. no loss of echo
: 1 min. to 3 min. loss of echo time
:Default 22mA , or 3.5 mA
: Dielectric rod PP, & Optional rod PTFE
Horn 316 S.S. for very low dielectric
constant materials and short blanking
Power
R load = (Vs - 14) / 25 mA
max.
- On the Web return to Home Page
10A833R2