Siemens WM12UT62ES User Manual And Assembly Instructions page 50

Table of Contents

Advertisement

en Troubleshooting
Fault
The programme does not
start.
The door cannot be opened. – –  – – is activated.
The water is not draining.
50
Cause
Door is not closed.
Childproof lock is activated.
termin. 
is activated.
Laundry is caught in the
door.
The temperature is too high.
Water level is too high.
Power failure.
Drain pipe or water outlet
hose is blocked.
Drain pipe or water drain
hose is caught or jammed.
Drain pump is blocked.
– –  – – is activated.
troubleshooting
Close the door.
1.
Press inicio pausa + carga to start
2.
the programme.
→ "Deactivating the childproof
lock", Page 39
Check whether termin. 
ated.
→ "Buttons", Page 24
Open the door again.
1.
Remove any trapped laundry.
2.
Close the door.
3.
Press inicio pausa + carga to start
4.
the programme.
Continue the programme by select-
ing
or
and pressing inicio
pausa + carga.
→ "Resuming the programme when
the programme status is Rinse
Hold", Page 38
Wait until the temperature has
dropped.
→ "Cancelling the programme",
Page 38
Start the
 programme.
Open the door using the emergency
release.
→ "Emergency release", Page 55
Clean the drain pipe and the water
outlet hose.
Ensure that the drain pipe and wa-
ter drain hose are not kinked or
trapped.
→ "Cleaning the drain pump",
Page 42
Continue the programme by select-
ing
or
and pressing inicio
pausa + carga.
→ "Resuming the programme when
the programme status is Rinse
Hold", Page 38
is activ-

Advertisement

Table of Contents
loading

Table of Contents