Check System Requirements - Agilent Technologies USB/GPIB Interface Converter 82357A User Manual

Check System Requirements

Before you install the Agilent IO Libraries Suite, you should verify that your
system meets the
minimum
install and use the software. Adding additional RAM may improve overall
system performance.
NOTE
The 82357A USB/GPIB Interface Converter is supported ONLY on
Windows 98 Second Edition, Windows Me, Windows 2000, and Windows
XP Professional.
Item
Hardware Requirements
PC Operation/
Memory
Hard Drive Space
USB Port
Software Requirements
Operating System
Agilent IO Libraries
NOTE
For Windows 98 Second Edition, you may need to install usbscan.sys,
located on the Windows 98 CD-ROM. See "Check for usbscan.sys
(Windows 98 SE Only)" in Chapter 3 - Troubleshooting the 82357A for
details.
Chapter 1
Step 1: Before You Install the 82357A
hardware and software requirements listed to
Minimum Requirements
200 MHz Pentium II (800 MHz recommended)
and 64 MBytes RAM (96 MB recommended).
215 MB for installation: 160 MB for Microsoft
.NET Framework, 55 MB for Agilent IO Libraries
Suite
125 MB for operation: 70 MB for Microsoft .NET
Framework, 55 MB for Agilent IO Libraries Suite
At least one USB port (to connect 82357A)
Windows 98 SE, Windows Me, Windows 2000
(Service Pack 4 or later), or Windows XP
Professional (Service Pack 1 or later).
Agilent IO Libraries Version L.01.00 or greater, or
Agilent IO Libraries Suite Version 14.0 or greater.
Installing the 82357A
9