Advertisement
Quick Links
IMPORTANT SAFEGUARDS
Read all instructions and warnings before operating.
If this product is dealer installed, leave these instructions for the end user for future reference.
P R O D U C T S
OWNER'S MANUAL
FOR MARINE GRILLS
Camco Manufacturing, Inc.
121 Landmark Drive, Greensboro, NC 27409
www.camco.net / info@camco.net
Advertisement
Summary of Contents for KUMA 216-HP
- Page 1 IMPORTANT SAFEGUARDS Read all instructions and warnings before operating. If this product is dealer installed, leave these instructions for the end user for future reference. P R O D U C T S OWNER’S MANUAL FOR MARINE GRILLS Camco Manufacturing, Inc. 121 Landmark Drive, Greensboro, NC 27409 www.camco.net / info@camco.net...
- Page 2 INTRODUCTION Thank you for selecting a Kuuma marine grill. Your unit was carefully inspected and tested at our factory. Please take the time to read this manual carefully; many of its instructions are essential to the safe operation of your new barbecue. Because of the continuing refinement of our product designs, your barbecue may possess features not discussed in the manual.
- Page 3 This manual covers the following models: 160-HP 216-HP 150-HP 125-HP *Each model has the build option of including a lid mounted thermometer and or a piezo igniter. In such cases the model number will be followed by a “-T” for a thermometer or a “-I” for a piezo sparker or both “- I – T” if includes both.
- Page 4 Operation and Maintenance A – IMPORTANT: ALWAYS BE CAREFUL WHEN USING GAS! • This instruction manual contains important information necessary for safe use of this appliance. • Read and follow all warnings and instructions before using this appliance. • Keep this manual for future reference. •...
-
Page 5: Connecting The Gas Cylinder
D – GAS SUPPLY: These grills are intended to be used with a standard 1-lb throwaway propane cylinder (CGA Connection No. 600).Only cylinders marked “propane” may be used. The supply cylinder must be constructed and marked in accordance with the Specifications for LPGas Cylinders of the U.S. - Page 6 E – LIGHTING THE BURNER: Read all instructions before attempting to light your grill and never use the grill until the instructions have been read carefully and understood. Also, make sure that: • The control valve and or regulator is in the “OFF” positon •...
- Page 7 E-2 PIEZO LIGHTING INSTRUCTIONS: 1. Verify gas supply is connected and control valve/regulator is in the “OFF” position. 2. Open the lid of the appliance. 3. Depress the control knob and rotate to “HIGH” position. 4. Repeatedly depress and release the piezo igniter until ignition occurs, refer to FIG.
- Page 8 I – LEAK TESTING: • During Leak testing, keep grill away from open flames or sparks and do not smoke. • Grill must be leak tested outdoors in a well-ventilated area. Leak test must be repeated each time propane cylinder is replaced or after it is removed for storage.
-
Page 9: M - Trouble Shooting
L – ACCESSORIES Camco only recommends using accessories and replacement parts from Camco Manufacturing. Camco accepts no responsibility for damage or malfunction due to the use of accessories and/or replacement parts from other brands. Please contact Camco at 001-336-668-7661 or e-mail at info@camco.net for the latest accessories and spare parts available for your grill. -
Page 10: Customer Service
CUSTOMER SERVICE In case of continued difficulty, issues or questions, please contact Camco Manufacturing, Inc. customer service at: Camco Manufacturing, Inc. 121 Landmark Drive Greensboro, NC 27409 USA 001-336-668-7661 E-mail: info@camco.net Website: www.camco.net WARNING: Due to our policy of continual product development, Camco reserves the right to alter or modify this product without prior notice.
Need help?
Do you have a question about the 216-HP and is the answer not in the manual?
Questions and answers