Page 2
Contact our friendly customer service department for help first before you return this item. kinborbaby-service@ kinbor.com Please read all instructions carefully and keep it for future reference. General Warnings: Danger! Keep all small parts and packaging materials for this product away from babies and children, otherwise they may pose a choking hazard.
TIPS ·For your use safety, please read and keep this manual carefully. Please observe the following tips and warning information, otherwise it will affect the safe use of this product. ·This product is suitable for babies with height less than 70cm. WARNING •To avoid danger, do not place sturdy and sharp products on the supporting platform.
Page 4
CHANGING TABLE INSTALLATION STEPS Step 1:Disassemble all components and place them on a soft level surface, such as a carpet. First, place components A and B on the same plane, and connect A1, A2 to B1, B2 respectively as shown in the picture. The other side is connected in the same way. Tips: 3 Adjustable Heights Height 1 - The height of the table top from the ground is 89cm, suitable for parents with a height of about 168cm to use.
Page 5
Step 2 After the connection, the height of the diaper table to the ground can be adjusted by adjusting the insertion depth of the buckle position of the Support Stand(B), so as to obtain the suitable height for use. Step 3 1.Open the large 2.After lifting to the 3.Then drop the bearing...
Page 6
Two-page siamesed plate Step 4 Insert the load-bearing plate C from the front to the top of the load-bearing frame. Note that the side with the Velcro is facing down. After placing, bind 4 Velcro to the load-bearing frame to prevent it from slipping. Step 5 As shown in the figure, the storage cloth box can be hung on the left side of the changing table as a storage bag.
Page 7
Welcome to visit our Amazon store and purchase our quality products! kinborbaby-service@kinbor.com Your suggestions and comments for KINBOR BABY are really important to us!
Need help?
Do you have a question about the RYT0366 and is the answer not in the manual?
Questions and answers