Specifications - TimTam PowerMassager PRO Manual

SPECIFICATIONS

The PowerMassager PRO is an ultra-modern therapy device taking modern recovery to the next
level of recovery performance. For an optimal recovery experience, the PRO has 3 Preset Deep Tissue
levels and a total of 5 massage modes. Outfitted with Antimicrobial Plastic Surfaces to offer non
cross contamination between users; the PRO offers a 175-degree adjustable head for total self-body
use. Embedded in the PRO is a LED Display for battery level and temperature gauge used for our
built-in heat technology accessory to increase recovery. We are able to offer all this with a whisper
quieter sound profile.
32mm Shaft
20mm Shaft
20mm Shaft
Auto Warming Round Tip (Included)
Auto Warming Round Tip
60 htz Vibrating Tip (Optional Accessory)
(Included) Auto Warming Round Tip
(Included)
60 htz Vibrating Tip
(Optional Accessory)
60 htz Vibrating Tip
(Optional Accessory)
Muscle Temperature Sensor F°
Skin Temperature
Sensor F°
Skin Temperature
Companion App Available Late 2019
Sensor F°
Companion App
Available Late 2019
Companion App
LED Display
Available Late 2019
Led Screen
Led Screen
Antibacterial Plastics
Antibacterial Plastics
Antibacterial Plastics
12v Li-ion Battery
MASSAGE MODES:
For Warmup, Recovery, Neck or Lumbar
modes, attach the desired tip and power
on. Press
massage modes until you find the desired
massage mode.
TURN ON
To power the device, insert the battery
into it and press the
which is located on the grip of the handle.
The LED screen will illuminate indicating
it has powered on.
ARTICULATING ARM
v
The PowerMassager™ Pro shaft can be
rotated up to 175 degrees of articulation,
allowin g you to target all areas of your
body easily. By pushing the red logo
portion of the dial directly above the shaft
you can then move the shaft into the
desired position. Once you find the right
massage point, release the button to lock
the arm in place.
175 Degree Rotation
175 Degree Rotation
175 Degree Rotation
Quiet Brushless Motor
Quiet Brushless Motor
Quiet Brushless Motor
Wireless Connectivity
Bluetooth
Connectivity
Bluetooth
Temperature
Connectivity
Sensor Button
3 Speeds -
1000, 2000, 2800 SPM
3 Speeds - 1000,
2000, 2800 SPM
3 Speeds - 1000,
Accessory Button
2000, 2800 SPM
5 Programs - Deep
5 Programs -
Tissue, Warmup,
5 Programs - Deep Deep Tissue, Warmup, Recovery, Neck, Back
Recovery, Neck, Back
Tissue, Warmup,
Recovery, Neck, Back
Secure Compartment for GPS Locator
and cycle through the
button once,
PRO
ACTIVATE HEAT
To initiate the heating function, attach the red
colored tip and power the device on. Press
and hold the button for 2 seconds until you
see the ball icon appear on the LED screen.
Within 2 minutes it will heat the Warmup Tip to
99°F .
ACTIVATE VIBRATION
To initiate the vibration function, attach the
larger silver colored tip and power the device on.
Press and hold the
you see the ball icon appear on the LED screen.
Instantly you will hear and see the tip vibrate.
DEEP TISSUE SPEEDS
The PowerMassager™ Pro has 3 Deep Tissue
speeds delivering up to 2,800 strokes per
minute. Click the
each of the 3 speed levels (1000,2000,2800 SPM).
TURN OFF
To power down the device, press and hold
the button for 3 seconds, or simply
remove the battery.
Temperature Sensor
The PowerMassager™ Pro has a built-in temperature sensor
allowing you to obtain baseline personal data pre, during and
post treatment! Locate the thermometer sensor icon on the
outside handle side of the grip. Power on the device, then
press the front of device against your skin and press and hold
the temp sensor button for 3 seconds and release. It will
measure and report the temperature of the area measured on
the LED screen. Optimal skin temperature is above 90
degrees, when the warmup tip you're using during therapy no
longer feels warm, you are approaching optimal muscle
temperature for safe workout or recovery!
icon for 2 seconds until
button to cycle through