Page 1
INSTALLATION GUIDE STAINLESS STEEL COMMERCIAL WORK TABLE WITH UNDERSHELF AND OVERSHELF, DRAWER, AND POT RACK 600WT2436KIT, 600WT2448KIT 03/2022 REGENCYTABLESANDSINKS.COM...
Page 2
INSTALLATION GUIDE DRAWER ASSEMBLY INSTRUCTIONS Set the tabletop upside down on a surface that won’t scratch it before assembling the drawer. Attach the Z bracket to the top of the frame with screws. Make sure that the top of the bracket goes outward and the bracket extends a bit further back than...
Page 3
INSTALLATION GUIDE WORK TABLE ASSEMBLY INSTRUCTIONS Insert the legs into the tabletop gussets. Once marked, slide the shelf onto the legs and You may need to loosen the set screw if one fully tighten all of the set screws. struggles to go in. Adjust the feet as needed to meet your height requirements...
Page 4
INSTALLATION GUIDE OVERSHELF ASSEMBLY INSTRUCTIONS Align the two L-brackets (A) with the back of Secure the four legs (B) to the L-brackets using the table and pre-drill holes through the side of the Allen wrench and set screws (C) provided. the tabletop for screws.