Advertisement
INSTALLATION GUIDE
WORK TABLE ASSEMBLY INSTRUCTIONS
1
Insert the legs into the tabletop gussets.
You may need to loosen the set screw if one
struggles to go in.
2
Partially tighten
the set screws.
Full tightening
will come later.
3
On each of the legs, mark the height
where you'll be installing your undershelf.
It should be at least 6 inches off the
ground for food safety.
REGENCYTABLESANDSINKS.COM
4
Once marked, slide the shelf onto the legs and
fully tighten all of the set screws.
5
Adjust the feet as
needed to meet your
height requirements
or to compensate
for uneven
flooring.
6
Flip the table
over and
peel off the
protective
film.
Advertisement
