Advertisement
Quick Links
IV Pole and Mounting bracket
Art. nr.
69760 and 69755-1 / 69755-2
Intended use
The IV pole and mounting bracket are intended to be used with HD Balance. Using an IV pole with the wheelchair
can make it easier for the user to be more mobile for certain types of treatments or examinations.
IV Pole and Mounting bracket are ordered separately. Note that neither product is intended to be used with
equipment from other manufacturers.
Parts included
(IV pole)
1 x IV pole
1 x IV hook
1 x screw M5x14
Assembly of Mounting bracket
Screw the mounting
1
bracket in place on
the back frame tube
with the included
screws and washers.
MD
1
HD Rehab AB
, Tryffelslingan 4, 181 57 Lidingö, Sweden
tel. +46(0)8-767 04 80 info@hdrehab.se www.hdrehab.se
User manual /
Assembly instructions
Doc. nr. 96821-1 Rev E 2022-02_23
Parts included
(Mounting bracket)
1 x mounting bracket
(LH model shown)
Page 1 (2)
Advertisement
Summary of Contents for Balance 69760
- Page 1 Intended use The IV pole and mounting bracket are intended to be used with HD Balance. Using an IV pole with the wheelchair can make it easier for the user to be more mobile for certain types of treatments or examinations.
- Page 2 User manual/Assembly instructions - IV Pole Page 2 (2) Assembly of IV Pole Push the hook into the top bushing. Note the alignment of the hole. Attach the hook in place with the screw. Lower the pole through the mounting bracket to the desired height. Tighten the clamp using the knob (a).