Advertisement
ASSEMBLY INSTRUCTIONS
•
•
•
over the years.
Assembly
•
Assemble the tree stand by pulling apart the legs of the stand so that they are X-shaped. Match the hole of the
does not protrude into the center of the stand so that the tree trunk can be inserted easily into the stand. (See
Figure A1 and A2)
Helpful Tip:
realign the flange and stand holes to avoid stripping the eye bolt or cracking the flange.
•
•
Helpful Tip:
look.
•
(See Figure C1 to C3)
Helpful Tip:
• FOR PRELIT TREES:
color labels indicated in Figure D and plug the adapter connected with green labeled extension cord into the wall outlet.
or missing bulbs. Replace bulbs promptly in order to maintain the performance and life expectancy of your pre-lit tree.
A1
C1
(See Figure B)
As you are assembling the tree, Connect the plug(s) securely to the extension cord(s) as per the
A2
C2
eyebolt through the hole in the stand, making sure it
need to be replaced
B
C3
Advertisement
Table of Contents
Related Manuals for Williams-Sonoma PEN-T-1025/700LEDCM
Summary of Contents for Williams-Sonoma PEN-T-1025/700LEDCM
- Page 1 ASSEMBLY INSTRUCTIONS • • • need to be replaced over the years. Assembly • Assemble the tree stand by pulling apart the legs of the stand so that they are X-shaped. Match the hole of the eyebolt through the hole in the stand, making sure it does not protrude into the center of the stand so that the tree trunk can be inserted easily into the stand.
- Page 2 2. Use only the adapter supplied with this product. Using a different adapter will damage the lights and may cause fire, or electrical shock hazards. 3. Keep out of reach of pets and children. 4. FOR INDOOR USE ONLY. ITEM #: PEN-T-1025/700LEDCM...
Need help?
Do you have a question about the PEN-T-1025/700LEDCM and is the answer not in the manual?
Questions and answers