Advertisement
Quick Links
Advertisement
Related Manuals for Floorex Products DM-2780
Summary of Contents for Floorex Products DM-2780
- Page 1 DM-2780 Safety & Operators Manual...
-
Page 2: Table Of Contents
DM-2780 Safety & Operators Manual Table of Contents Contents Table of Contents ................. 1 Safety Instructions ................2 Filter Cleaning ..................4 Operating Instructions ................. 5 Electrical Safety ..................7 Problem Solving ................... 9 1800 FLOOREX PAGE 1. 1800 356 673... -
Page 3: Safety Instructions
DM-2780 Safety & Operators Manual Safety Instructions Read and understand the instructions on the Dust Extractor and in this manual. Different models may have different parts and controls. Equipment should only be operated by trained personnel, in good physical condition and mental health (not fatigued). - Page 4 DM-2780 Safety & Operators Manual Never operate or store the Dust Extractor in rain or if heavy moisture is present. WARNING! Breathable silica may be generated by use and maintenance of this the Dust Extractor. Silica can cause severe and permanent lung damage, cancer, and or other serious diseases.
-
Page 5: Filter Cleaning
DM-2780 Safety & Operators Manual Filter Cleaning The Dust Extractor has a filter cleaning system that operates when the filter cleaning knob is activated. In normal operation, the filters will be sufficiently cleaned without the need for any manual filter cleaning such as washing the pleats directly. -
Page 6: Operating Instructions
DM-2780 Safety & Operators Manual Operating Instructions Wear clothes suitable for the job and for the work place including, safety shoes, hard hat, hearing protection, non- fogging vented safety goggles, and dust respirator suitable for dust. Be sure all equipment is tested and tagged prior to use on any job. - Page 7 DM-2780 Safety & Operators Manual Switch the Filter cleaning switch on for 20-30 seconds prior to operating if the filter is not clean. a. This can be switched off after the 20-30 seconds but also can be left on during vacuum operation.
-
Page 8: Electrical Safety
DM-2780 Safety & Operators Manual Electrical Safety All electrical maintenance and repairs are to be carried out by qualified persons only. CAUTION - Line terminals may be alive when main switch is in the off position. Disconnect all power at source before performing any maintenance or repairs. - Page 9 DM-2780 Safety & Operators Manual Connect the Dust Extractor to suitable power outlet. This is 15A. If you need to connect using extension cords please consult your supplier to confirm the best size conductor to use. The Dust Extractor can produce sound pressure levels greater than 85db.
-
Page 10: Problem Solving
DM-2780 Safety & Operators Manual Problem Solving PROBLEM CAUSE REMEDY EXPLANATION The Dust No power is Check the power is Using another tool confirms power is Extractor will present at cable present with another present not start / run. PowerPoint. - Page 11 DM-2780 Safety & Operators Manual Warranty: Warranty is for a period of 12 months from original purchase date, covering manufacturer’s defects (does not cover brushes on the motor which have an estimated life of 600 hours) 1800 FLOOREX PAGE 10.
- Page 12 DM-2780 Safety & Operators Manual Floorex Products Your complete supplier of all your concrete surface preparation needs • Diamond grinders • Dust extraction • Shotblasters • Screed mixers • Diamond Tooling • Floor Scrapers • Coating application Web: www.floorex.com.au Email: sales@floorex.com.au...