Summary of Contents for True IoT Router WiFi
- Page 1 Connect True IoT Router WiFi first time 1. Insert normal SIM into SIM slot (left) on True IoT Router WiFi as shown, push it until locked (to remove SIM, press SIM slot, it’ll be out) 2. Bring Adaptor...
- Page 2 3. Plug it into Power port of device 4. Switch ON...
- Page 3 5. Power LED (left) turns blue = power on 6. Wait a moment, Wi-Fi turns blue = Wi-Fi ready to use, red 3G/4G = not ready to use 7. Wait a moment, blue LED at SIG = SIM TRUE connected (mobile network) *3G/4G LED will disappear* 8.
- Page 4 9. LED status (refer to user manual page 2 – 3)
- Page 5 10. Test with iPhone, select Settings 11. And then Wi-Fi...
- Page 6 12. Back to True IoT Router WiFi: beneath the device, there’ll be a sticker shows data for device connection WLAN NAME (SSID) : network name = True_IoT_Router_WiFi_47776 WLAN KEY : password = 30247776 (or the last 8 digits of IMEI number *each device will vary / it’s...
- Page 7 13. Back to iPhone : at Wi-Fi, tap a button 14. Then on the right to turn it on 1) Button will turn green (On) Searching for network => True_IoT_Router- WiFi… (name per no. 12.) => tap this name...
- Page 8 15. Enter Password 16. Then 1) Enter Wlan Key from no. 12 = 30247776 Tap Join...
- Page 9 17. Once connected 18. Test using => go to App : Safari 1) A check mark will appear in front of network name A fan sign (connected Wi-Fi) appears at the right...
- Page 10 19. Try www.truemove-h.com 20. Test speed via App : SpeedTest...