Everylite EZBeam Series Install Manual

Install Guide
EZBeam Series

BEFORE YOU BEGIN

STOP
Read these instructions completely and carefully.

Prepare Electrical Wiring

• Acceptable for use in dry, damp and wet locations
• Follow all National Electric Codes (NEC) and local codes.
• When choosing wire, factor in voltage drop, amperage rating, and type (in-wall rated, wet location rated, etc.).
• Do not install if product has any visible damage.
• Do not modify or disassemble this product beyond instructions or the warranty will be void.
!
WARNING
RISK OF ELECTRICAL SHOCK
• Turn power off before inspection, installation or removal.
• Properly ground power supply.
RISK OF FIRE
• Use only UL approved wire for input/output connections
• Minimum wire size 18 AWG
• Follow all NEC and local codes.
Shock Hazard.
May result in serious injury or death.
Turn off power at the circuit breaker
before installing this product.
Date:
Type:
Firm Name:
Project: