Advertisement
tossbrightz
INSTRUCTIONS
WARNINGS:
Do not mix old and new batteries and do not mix alkaline, standard (carbon-zinc)
or rechargeable (nicad, ni-mh, etc.) batteries.
Caution: Batteries may explode or leak, and cause burn injury if recharged, disposed of
in fire, mixed with a different battery type, or inserted backwards. Replace all used
batteries at the same time. Clean battery contacts and contacts on the device prior to
installing. Remove batteries if item will not be used for long periods of time. When
battery expires remove promptly.
CHOKING HAZARD
Small parts. Not for children 3 years of age or under.
CONTENTS:
2x
2x
STEP 1 – Install Batteries 3 AA
Open latches on the side of the battery pack to access or insert batteries.
A.
Using 2 screws, attach the clip plate
to either left, right, or top side of
board closest to the opening.
See STEP 4 for possible positions.
TOSS BOARD
OPENING
TOSS BOARD
SIDE
™
2x
LATCHES
support@brightz.com
419 . 517. 0049
6x
4x
6x
2x
38x
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Brightz tossbrightz
Summary of Contents for Brightz tossbrightz
- Page 1 ™ support@brightz.com 419 . 517. 0049 INSTRUCTIONS WARNINGS: Do not mix old and new batteries and do not mix alkaline, standard (carbon-zinc) or rechargeable (nicad, ni-mh, etc.) batteries. Caution: Batteries may explode or leak, and cause burn injury if recharged, disposed of in fire, mixed with a different battery type, or inserted backwards.
- Page 2 STEP 2 – Install Battery Pack Continued... SNAP battery pack into place on clip plate. RELEASE by pushing top tab of clip plate. TOSS BOARD OPENING STEP 3 – Installing Lights around Tossboard Opening Keeping the board flipped over, attach one of the 1-foot LED light strings around the opening using 3 screw-in fasteners as shown.
Need help?
Do you have a question about the tossbrightz and is the answer not in the manual?
Questions and answers