FiTech PM 43 Operating Manual

Hide thumbs

Table of Contents

Quick Links

Download this manual

OPERATING MANUAL

Flowmeter PM 43

Type:

Equipment No.

Prior to the first use, please follow the instructions under the

"CLEANING" section of this Operating Manual on page 6!

for the

fitech

Flow measuring equipment

PM-4300-29-N

13 780.29

Table of Contents

Need help?

Do you have a question about the PM 43 and is the answer not in the manual?

Questions and answers

Summary of Contents for FiTech PM 43

Page 1 OPERATING MANUAL for the fitech Flowmeter PM 43 Flow measuring equipment Type: PM-4300-29-N Equipment No. 13 780.29 Prior to the first use, please follow the instructions under the “CLEANING” section of this Operating Manual on page 6!
Page 2 Operating Manual fitech ag Switzerland page 2 fitech-Flowmeter Table of Contents Chapters Subjects page fitech Applications of the -Flowmeter Introduction to the Operating Manual Safety, operation and maintenance Place of operation Operation Preparation for measurements Measurement Cleaning Address/Telephone/Fax Annex Spare parts list...
Page 3 Operating Manual fitech ag Switzerland page 3 fitech-Flowmeter fitech Applications of the -Flowmeter fitech -Flowmeter is used for measuring the flow of high-viscous, pasty products. Depending on the product to be measured, different size nozzles may be used, however, the standard-size nozzle has a 4 mm hole, H7.
Page 4 Operating Manual fitech ag Switzerland page 4 fitech-Flowmeter Place of operation The Flowmeter is to be carefully unpacked and checked. Should you notice any transport damage please inform us immediately. We will replace damaged parts as quickly as possible. CAUTION: The use of a damaged Flowmeter may be the cause of grievous fitech physical injuries to personnel operating it.
Page 5 Operating Manual fitech ag Switzerland page 5 fitech-Flowmeter 1. Choose size of nozzle in accordance with the product to be measured and screw chosen nozzle (Pos. 5) manually and solidly into the nozzle carrier (Pos. 4). 2. Remove measuring cylinder (Pos. 3) from pressure cylinder (Pos. 2) by unscrewing manually.
Page 6 Operating Manual fitech ag Switzerland page 6 fitech-Flowmeter Cleaning With the conclusion of the flow measurements, the Flowmeter is to be thoroughly cleaned. Follow these steps: Ensure that the Flowmeter is not under pressure by making certain that hand valve (Pos.
Page 7 Operating Manual fitech ag Switzerland page 7 fitech-Flowmeter fitech -Flowmeter – Spare parts list Position Description Support 1.4301.G Pressure cylinder 242.40.50.1.4301 Measurement cylinder (without cooling jacket) 90.40.50 Nozzle carrier 27.60.M12 Nozzle 2.6 mm H7 / Nozzle 4 mm H7 Pressure plate B.39.9.21 Pressure gage R ½", 0 to 6 bar 0.6.
Page 8 Operating Manual fitech ag Switzerland page 8 fitech-Flowmeter...

This manual is also suitable for:

Pm-4300-29-n